@Harley
I will start another thread after this...check out the pix below. One question, where does that yellow wire belong? It's not connected to anything and it looks like it was pulled off something, but I don't see anything loose
Dante
21
on: Time Format
|
||
Started by Dante - Last post by Dante | ||
22
on: Time Format
|
||
Started by assquatch20 - Last post by assquatch20 | ||
Still got the amp and cabs. Might sell it all but it would take a sweet offer. Pulled it all out yesterday to fool around. Still love it so it'll be tough but I'm trying to move away from so much gear.
|
23
on: Time Format
|
||
Started by Shibiwan - Last post by rnolan | ||
Hey Shibiwan, wow, that's 3 very very nice looking guitars. I agree the maple top is just gorgeous. IIRC 1989 was around when the best Charvels were made? My Anderson is 2 years earlier, 1987 vintage
|
24
on: Time Format
|
||
Started by Zilthy - Last post by rnolan | ||
Hey Harley, I agree, I saw Hipshot were doing the staggered post tuners, good idea, although I like to have at least 3 turns around the post, which partly comes from my early days when I needed to repair broken strings coz I couldn't afford to buy new ones. But also because it helps with string break. And then, not all string trees are equal either.
|
25
on: Time Format
|
||
Started by assquatch20 - Last post by rnolan | ||
Hey Duke The ADA TS100 is a rare find, absolutely perfect choice, hope it works out
Hey assquatch, did you sell the other bits? |
26
Let's Get Technical / Troubleshooting Problems / Re: MP-1 Classic Noise Gate "stuck" at max values even when turned off
on: Time Format
|
||
Started by Bret - Last post by rnolan | ||
Thanks Harley, that's good to know. I thought it would be the same as the MP-2.
Hey Bret, glad you have a couple of (very nice) alternatives. Not sure how/if you can disable it. Let us know if you work it out, better still fix it. I'll PM Gregg to maybe have a look into it if he has time. |
27
on: Time Format
|
||
Started by Duke of Metal - Last post by Shibiwan | ||
Looking to put my MP-1 back into a rig to use. What's everyone using for Poweramp now days ? Marshall 9200. 200W of stereo tube glory! |
28
on: Time Format
|
||
Started by Shibiwan - Last post by Shibiwan | ||
Nice setup there Shibiwan, Thanks! I've been cleaning up and restoring my old guitars. The Charvel has been with me since 1989 (my 2nd guitar ever). The flame maple top is spectacular. |
29
on: Time Format
|
||
Started by Duke of Metal - Last post by Harley Hexxe | ||
Dante,
All my MT 200s are either racked up or packed up at the moment. I can't recall the part number, but they are easy to spot. Take off the top cover and look for two transistors about an inch long. There are two for each channel. They look like a black square with a metal square the same size on top of it and a screw holds this down to the chassis. On the bottom of the black square there will be three legs soldered to a PCB. Those are the culprits. You should be able to read the part numbers on the front of the black square. |
30
on: Time Format
|
||
Started by Zilthy - Last post by Harley Hexxe | ||
Richard,
The string trees on a Strat can be a mixed blessing. They can help with stock post tuners, but with staggered post tuners, you want to take them off, (like I did with my 1980 STRAT). |