ADA Depot Too - A Forum To Support Users of ADA Amplification Gear

Let's Get Technical => All PREAMP Tech Tips & Support => Topic started by: Chip Roberts on April 09, 2021, 01:50:30 PM

Title: MC1 Power Supply
Post by: Chip Roberts on April 09, 2021, 01:50:30 PM
From what I understand, the MC1 has a 7 pin for phantom power via the MP1.  My question is what power supply can I get that would work with the 9V out?  I use a PowerAll for my pedals.
Title: Re: MC1 Power Supply
Post by: Harley Hexxe on April 09, 2021, 03:12:14 PM
If I recall correctly,

           The ADA wall wart is 9V DC with 500mA, so any similar wall wart will work, but you have to change the plug to a "N" type barrel plug. I did that with one I had laying around, and it still works to this day.  Center pin is negative.

     Harley 8)
Title: Re: MC1 Power Supply
Post by: MarshallJMP on April 10, 2021, 01:17:06 PM
It also works with a 9Vac adapter, this way you don't need to worry about the polarity of the jack (which is 2.5mm)