ADA Depot - A Forum To Support Users of ADA Amplification Gear
Let's Get Technical => All PREAMP Tech Tips & Support => Topic started by: Aelfad on August 13, 2019, 04:37:05 PM
-
While my MP-1 is still not working (I'll get to it soon I hope), I noticed that the fuse holder won't stay in place and needs replacing. My knowledge about fuses is pretty limited - all I know it that the rating must be the same, so can you educate me? Should I look into a glass or ceramic one? Also, the old one is filled with sand. Does it really matter?
-
You need a T 500mA (T= slow blow) 6x32 glass fuse. Filled with sand will also work but is more expensive.
-
Thanks, man!
-
No problem, let me know if you have more questions.