ADA Depot Too - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  

News:

Lets get Technical > All Things Tube All about preamp and power amp Tubes.

Pages: [1]   Go Down

Author Topic: Hot Rod Marshall Tone - JCM 800 from the 80s  (Read 4173 times)

0 Members and 1 Guest are viewing this topic.

Dante

  • Administrator
  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 1782
  • Nothing more uncommon than common sense
    • The Best Cover Band In Sacramento

Let me know how this works for you guys, I have yet to try it. I found this from something I printed off the old Depot in 2008.

Voicing: Ultimate High Gain
Drive: 60
Overdrive: 62
Master: 58

Compressor: out

Tone Controls
Low: +8
Mid: -4
Hi: +6
Pres: +6

Graphic EQ
100 Hz: +12
170 Hz: +8
280 Hz: +6
470 Hz: -4
800 Hz: -2
1.3 kHz: -2
2.2 kHz: 0
3.8 kHz: 0
6.3 kHz: +2

Wah: In
Mode: Triggered
Sensitivity: 76
Delay: 28
Start Point: 70


YMMV. I can tell already that the Tone controls are going to sound blech on my rig.
Logged
ADA Gear: MP-1 Classic | MP-2 | MicroTube 200 | MicroFet | MXC w/Quad Switch
Current Live Rig (wait 10 min., it'll change): Peavey Classic 20mh head into the matching 1x12 speaker cab, using my Boss MS3 via 4CM.
Current Rack rig: Digitech 2120 > ADA MT-200 > 1x12 Thiele cab (EV Force speaker)

Kim

  • Administrator
  • Hero Member
  • ******
  • Offline Offline
  • Posts: 810
  • If it's too Loud...you're gonna get more of THAT.
Re: Hot Rod Marshall Tone - JCM 800 from the 80s
« Reply #1 on: Time Format »

I'll try this one too tonight.  :thumb-up:
Logged

Kim

  • Administrator
  • Hero Member
  • ******
  • Offline Offline
  • Posts: 810
  • If it's too Loud...you're gonna get more of THAT.
Re: Hot Rod Marshall Tone - JCM 800 from the 80s
« Reply #2 on: Time Format »

Sounded pretty good to me, but I wasn't digging the Wah part as much. 

Thanks for sharing!
Logged

vansinn

  • Guest
Re: Hot Rod Marshall Tone - JCM 800 from the 80s
« Reply #3 on: Time Format »

Haven't tried this as yet; just commenting on the triggered wah: I never could make it work well with distortions, mostly because I can't narrow the range and lower the Q, to simulate a Dunlop low-Q midrange wah.
No matter what I've tried, triggered wah with distortion always sounds too aggressive and cocked-up.
Logged
Pages: [1]   Go Up