Hey Richard,
Thanks for posting that for me
I've been going through the manual, and brushing up on the MB-1 and B500B.
I don't have the Pitchtraq and Digitizer plugged in, I wanted to leave them out for the initial sound check, but they will be included in the complete bass rig when I get it working. I plan to use the Pitchtraq for one octave lower effect only in the Low channel loop, and the Digitizer for additional Chorus/Flange effect in the High channel loop, but that will come later.
I didn't get a chance to mess with it yesterday like I had planned, but I'm going to try to get to it today. I'm going to pull the MB-1 and try it through a small mixer I have here to see if I'm getting signal, then I'll plug in one of my MP-2's into the B500B to see the same. I've already checked cables to make sure I have confirmed good ones on the initial attempt, so I'm good there.
One of the things I bought a while back is a True Tone mA reader/Cable tester, and that is something I would recommend to every guitar/bass/keyboard player, no matter what size rig you have. It saves a lot of time and guess work.
@ MJMP, thank you man! You're a life-saver
Harley