Miscellaneous > Discussions

Best Guitar Processor/Synth?

(1/2) > >>

Satch:
Looking for some input on the following units:
Boss GT-100
Line 6 POD HD500X
Roland GR-55

I am so tired of lugging my gear around to every gig. Looking for a unit that I can do the following:
1. Great sound directly thru PA. Also be able to run in parallel with powered monitor
2. Nice software editor, central and updated frequently patches and firmware
3. Amp modeling, effects
4. Ease of use on stage

Bottom line like to be able to carry one unit to shows that will get me all the sounds I need. Keep in mind this is for a 2 cover bands I am playing in so versatility on sounds to be able to cover just about any song is key.

rnolan:

--- Quote from: Satch on August 04, 2014, 07:04:02 AM ---Looking for some input on the following units:
Boss GT-100
Line 6 POD HD500X
Roland GR-55
I am so tired of lugging my gear around to every gig. Looking for a unit that I can do the following:
1. Great sound directly thru PA. Also be able to run in parallel with powered monitor
2. Nice software editor, central and updated frequently patches and firmware
3. Amp modeling, effects
4. Ease of use on stage
Bottom line like to be able to carry one unit to shows that will get me all the sounds I need. Keep in mind this is for a 2 cover bands I am playing in so versatility on sounds to be able to cover just about any song is key.

--- End quote ---
You could do it with MP2 (I have for years now) no amp modelling (which I don't like anyway, the MP2 can be the real sound of pretty much any preamp/amp).
FX are separate (except stereo chorus, wah, trem, comp, gate, cab sims are in MP2) (i.e. add delay and reverb (MP2 has stereo parallel loop so you can mix the digital FX in and not loose the analogue signal  :thumb-up: )).
No more firmware updates  :( , it's MIDI CC capable so you can probably edit it with a library program.  Once it's set you don't need to though.
Cab sims sound great into desk/monitor/record etc.
I'll refrain from commenting on the other units above, I don't like any of them for a variety of reasons.

Dante:
I had a GR30 that I used just for synth sounds and it was alright, but it was no keyboard player, that's for sure.

I don't see why you can't do what I'm doing; run an MP-2 with one external FX device in a 2u rack. The MP-2 will allow you to run parallel between the mix and the outboard monitor (or guitar amp) onstage. I find it sounds very good directly into the mix, and of course, it has direct outs already, which is very nice. That also allows you to run the stage outs to your amp.

Downside: no software editor (that I know of), and not that easy to edit onstage....that's what practice is for, fine tuning :)

GuitarBuilder:
When you throw synths in the mix, everything changes!

For straight guitar in, I'd recommend the Pod HD500X, unless you can afford an AxeFX.  The Pod also gives you the option to use the JTV guitars at a later stage for the ultimate combo package.

I've used the HD500, Lexicon MPX G2, MP-1, MP-1C, MP-2, Rockman XPR, Nobels SST-19.  The HD500 is easily the most versatile and more modern of them all.  The others may have better tone in some cases, but the Line 6 computer interface puts the HD500 in another class altogether.  Best ease of use on stage.

Now if you want synths, all of the above is out.  The Roland G5-55 requires a 13-pin GK equipped guitar for best performance.  It has now been trumped by the Boss GP-10.  However none of them track as well as the Fishman Triple Play (FTP), which requires a separate hexaphonic pickup on your guitar and a computer or iPad to make the sound.  Tested well on stage, but requires higher technical knowledge.

El Chiguete:
Yeha only use synths if you want to get the synths sound effects and want to sound like a violin, piano, drums, sticks, etc... BUT if not stick with a newer guitar based multi-effects processor. I think too that if you want to have just 1 thing that does it all and go direct to the P.A. then go with an HD500x. I personally don't use Line6 because I still want my pure analog amp tones (thats why I have an ADA MP-1) together with older generation multi-effects processor, BUT I do have to say that the software programing for patches is something that I would like to have...

Navigation

[0] Message Index

[#] Next page