ADA Power Amps > B200s

Convert or change input voltage

(1/2) > >>

vmaxvmax:
Hi,
Is it possible to rewire a USA model for EU voltages or is the tranny country specific?
Cheers and merry Christmas everybody!

rnolan:
B200s is an easy change but you need to change the transformer.  There's room to mount a toroidal, you just need to buy one with the correct voltages.  I'm pretty sure I posted about this ages ago when I did one.  MJMP can tell you the voltages you need IIRC it was +30v -30v 6amp?? but it was a while ago.  I found a perfect toroidal online.  The toroidal mount with one bolt so you only have to drill a hole in the top cover and wire it up.

vmaxvmax:
Great, thank you.

MarshallJMP:
You need a transformer with two 30V, 4A windings.

vmaxvmax:
Thank you!

I had found one on eBay for $45 in the US but unfortunately the seller wouldn't export and in the end, it went for $45 to a single bidder...

Such is life!

I let my original B200 go to rust in a garden shed in the 80's after buying a Marshall 9100.

Navigation

[0] Message Index

[#] Next page