Hey, I have new pickups! Trying out some DiMarzio passives I bought from Systematic Chaos and I could use a little help with my wiring options...
Ok, since I needed to purchase a new pot for these passive pups, (going from the active 25k pot to the passive 500k pot) I figured I may as well make the best of my options and coil splitting would be fun. I bought a
Push/Pull 500k pot for the coil splitting.
Then, looking through the sea of DiMarzio wiring diagrams on their site, I "thought" this is the one I want:
http://www.dimarzio.com/sites/default/files/diagrams/2h1ppsplitv_3w_all.pdfI get it all wired up according to that diagram, and it doesn't seem like it's actually what I wanted after all. But I attached a crude diagram I made of what I really want. The humbucker modes need to be in the standard humbucker sound, not a "pair of single coils side by side". i can't even be sure of what's going on, it's just really weird.
So what's wrong? Is what I want possible with what I have? I do not want to drill another hole for any reason..this has to work with the existing holes I have (one pot, one 3 way toggle switch)