Hey!
Hope that this is the right Palace for this kind of question.
I watched this video on YouTube www.youtube.com/watch?v=Nh1-HxzPOWY (http://www.youtube.com/watch?v=Nh1-HxzPOWY)
and was asking myself which settings this guy may have used?
Does anyone have suggestions? E.g. tube voicing or graphic eq settings.
Thank you!
Shredzilla,
I think you have this in the right place. Here's my 'metal' patch on the MP-2, it may not be exactly what you're looking for, but it'll give you a head start. I was trying to emulate the sound of my Mesa Boogie DC-5 combo (a single rectifier) with the trademark 'V' pattern on the EQ.
Keep in mind: the guitar, the pickups, the amp, the speakers, and the room, are all contributing factors to tone. There are more factors of course (mics, mic placement, tunings, strings, etc.) but I wanted to throw that out there. What works for me, may not work for you, and vice versa. I actually have this patch in several different variations for different guitars (I typically save a bank of 10 patches for each guitar - this one is for the Gibson Explorer w/PAF pickups).
Dante's Metal Patch:
Voicing: 5 (Warm Vintage)
Drive: 90
Master: 80
Compressor: OUT
Lo +6
Mid -2
Hi 0
Pres +6
EQ
100 = +12
170 = +6
280 = +12
470 = -6
800 = -12
1.3 = -4
2.2 = +10
3.8 = +2
6.3 = +4
Noise Gate: In
Threshold: 50
Chorus: OUT
F/X Loop: OUT (switchable via Quad switch)
Ch A: 60%
Ch B: 40%
Hey Shredzilla, there's 2 of my MP2 patches that may interest you (http://adadepot.com/index.php?topic=126.0) let me know what you think. (http://adadepot.com/index.php?topic=126.0) Another big variable with tone is how you play the notes, I tend to play quite hard and destroy picks and D strings, but if you don't put the energy in.....