Let's Get Technical > All PREAMP Tech Tips & Support

MC1 Power Supply

(1/1)

Chip Roberts:
From what I understand, the MC1 has a 7 pin for phantom power via the MP1.  My question is what power supply can I get that would work with the 9V out?  I use a PowerAll for my pedals.

Harley Hexxe:
If I recall correctly,

           The ADA wall wart is 9V DC with 500mA, so any similar wall wart will work, but you have to change the plug to a "N" type barrel plug. I did that with one I had laying around, and it still works to this day.  Center pin is negative.

     Harley 8)

MarshallJMP:
It also works with a 9Vac adapter, this way you don't need to worry about the polarity of the jack (which is 2.5mm)

Navigation

[0] Message Index