The Vault = Schematics and Mods

[leninvargas]

Hi Dante, the link for ADA-MP-1-Classic-PCBD-assembly is broken. Just letting you know so you can check it out, and I take this opportunity to greet you again.

[Dante]

My apologies!

Thanks for finding that, the link is fixed HERE's a COPY FOR YOU

[DavidMeissner]

Does anyone know if schematics are available for DM-2 and DS-4 pedals? Also, does anyone know if the cable is a special cable? I seen to remember my old cables, when I had the 2FX and Digitizer 4, as being stereo cables (TRS), but maybe I am way off on this.

Any help is greatly appreciated.

[Harley Hexxe]

The cable is a TRS like all the other footswitch controllers.

I found a file for the DM-2, and I'll attach that here.

MJMP might have the schematic for the DS-4, but he's been MIA lately.

[rnolan]

I have some schematics for 2FX, Digitiser 4, FS2, S1000, TFX4, D1280 & D640.  But not DM-2 and DS-4 unless they also have a different name ?

[Dante]

I don't have ether one....yet, checked all my stuff

I will add them to the vault if/when i get them tho

[Harley Hexxe]

Just a suggestion,
  You might want to check the schematics for the machines they control to see if they're included.

   I just attached a link in a reply for the 2FX because MJMP replied to someone else looking for a DM-2 schematic and that was what he attached to his reply.

[rnolan]

What is/are the DM-2 and DS-4?  If they relate to the schematics I have I'll check if they are included with those. E.g. I have 6 schematics for the 2FX and 7 test bench procedures

[Harley Hexxe]

The DM-2 is a 4 button foot controller for the 2FX. I have one
The DS-4 is a 4 button foot controller for the Digitizer 4. I have one of those too.