• Welcome to ADA Depot - A Forum To Support Users of ADA Amplification Gear.
 

Microcab II XLR output

Started by jaykay73, May 06, 2017, 03:28:44 PM

Previous topic - Next topic

jaykay73

Quick question...

Is the XLR output mic level as indicated on the unit or line level? The manual does not mention.

Thanks for help.

JK

MarshallJMP

It's line level according to the schematics.

jaykay73

Thanks very much. This will be very helpful for my needs.

So the description on the unit is an error?

JK

jaykay73

Interesting... The Microcab I has line level XLR outputs while the Microcab II has mic level outputs according to the schematics. I guess I'll need to mod the outputs of my II to the I schematics.

JK

jaykay73

Just had a look at the schematics. Very strange...

For the Microcab I:

The schematic for Audio Channel A (drawing number 807) has the balanced out labelled as "mic level".
The schematic for Audio Channel B (drawing number 808) has the balanced out labelled as "line level".

The electrical components in the output sections are exactly the same as per the diagrams!?! So I suspect a labelling error.

Does anyone know for certain whether the XLR outs are mic or line level?

Thanks,

JK

MarshallJMP

Same for the MCII schematics, ch A mic, ch B line. Thanks for pointing that out,never noticed it before.

Harley Hexxe

I believe both channel A and B are line level. There is no drop in signal when I use both channels to the mixing board.
I only have two brain cells left, ...and I'm saving them for the weekend!

MarshallJMP

What out do you use, the jack or xlr?

Harley Hexxe

To a mixer I always use XLR
I only have two brain cells left, ...and I'm saving them for the weekend!