• Welcome to ADA Depot - A Forum To Support Users of ADA Amplification Gear.
 

The Vault = Schematics and Mods

Started by Dante, December 29, 2013, 09:16:49 AM

Previous topic - Next topic

NeverAfter

ADA MP-2 | Rocktron Intellifex | Mesa 20/20 | Furman PL-PLUS E | ENGL 412S | FCB1010

NeverAfter

ADA MP-2 | Rocktron Intellifex | Mesa 20/20 | Furman PL-PLUS E | ENGL 412S | FCB1010

rnolan

Cool  :thumb-up: and many thanks  :wave: . Need to get Dante to copy them to the link area...
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

Dante

Thanks a lot...more work for me :hair-out:

NeverAfter

ADA MP-2 | Rocktron Intellifex | Mesa 20/20 | Furman PL-PLUS E | ENGL 412S | FCB1010

Dante

#65
DONE. You'll notice a much longer list of schematics for the MP-2 in the Vault now

I also found some schematics for the MXC controller, I'll get those in here too

Kim

I was looking through some old stuff and found some pics with notes about MOD3.1 

Remember that the MOD3 needs to be done first before applying this revision.

rnolan

Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

DannyjoeCarter

WOW found everything I need right here!!

So a quick question those in the know - to do "just" the mid scoop mod on the MOD3.666 basically I could just change out R151 with the new value couldn't I?

I'm loving the fact that it says you could go from -12 to around -30!!  :headbanger:
I'd be happy with around -14 or -16  ;D
Owner of DeJayce Guitars
www.dejayce-guitars.com
www.youtube.com/dannyjoecarter
www.Faceb**k.com/dannyjoe.carter

Iperfungus

Quote from: DannyjoeCarter on January 18, 2017, 03:03:23 AM
WOW found everything I need right here!!

So a quick question those in the know - to do "just" the mid scoop mod on the MOD3.666 basically I could just change out R151 with the new value couldn't I?

I'm loving the fact that it says you could go from -12 to around -30!!  :headbanger:
I'd be happy with around -14 or -16  ;D

Too much mid-scoop will kill you, Dan!  :amaze: :amaze: :amaze:
On the run again!

DannyjoeCarter

#70
Quote from: Iperfungus on January 18, 2017, 04:54:53 AM
Quote from: DannyjoeCarter on January 18, 2017, 03:03:23 AM
WOW found everything I need right here!!

So a quick question those in the know - to do "just" the mid scoop mod on the MOD3.666 basically I could just change out R151 with the new value couldn't I?

I'm loving the fact that it says you could go from -12 to around -30!!  :headbanger:
I'd be happy with around -14 or -16  ;D



Too much mid-scoop will kill you, Dan!  :amaze: :amaze: :amaze:

Yeah for sure  ;D I just need a little less than what is available to drop now.
I'm gonna do this mod, just need to see where exactly this set of components are on my board for the mid EQ section.  :D
Owner of DeJayce Guitars
www.dejayce-guitars.com
www.youtube.com/dannyjoecarter
www.Faceb**k.com/dannyjoe.carter

Moshefier75


rnolan

This is for the MP1, the MP2 battery is vertical.  Also this will erase all patches, so you'll have to reload the factory presets into RAM (from the EPROM) and reprogram any other patches.
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

zeppelin

Hey guys sorry for posting this.
Is there a Mod for the MP1 effects loop section?
I thought I saw it last time in the Old forum last time.

rnolan

Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few