• Welcome to ADA Depot - A Forum To Support Users of ADA Amplification Gear.
 

News:

Need a Schematic? Check the Vault *MP-1 Classic Schematics Just Added!!

Main Menu

Midi CC control of MB1

Started by rnolan, July 15, 2016, 08:52:25 AM

Previous topic - Next topic

rnolan

I've been sussing out the MB1 CC capabilities (lv 2.0 or later firmware), I've posted some stuff in the  Step On It topic in case anyone's interested.
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

vansinn

Que? I have an MB-1 (actually bought from an Aussie near Brisbane), never noticed it can has CC..
(BTW, why not add url../url to urls's ;) )

rnolan

Hey Van, yes it has some CC capability, not sure how much I'd use it though  :dunno:

(BTW, why not add url../url to urls's) not sure what you mean ?? But I'm sure it's good and I'm happy to learn  :thumb-up:
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

Kim

Fixed that for ya, R.   :)

rnolan

Thanks Kim, so how do you do that ?
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

Kim


Peter H. Boer

Quote from: vansinn on July 16, 2016, 12:14:34 AM
Que? I have an MB-1 (actually bought from an Aussie near Brisbane), never noticed it can has CC..
The 2.05 software gave CC.

However it's use is limited, as the amount of step you can CC throught are the steps that you programm.
It's not like you have 127 steps through each parameter.

So, for me, unusable for live purposes, but sometimes comes in handy when programming sounds. (haven't done that in ages though  ;D)
Nothing beats MB-1s and MP-1s with MDRTs

http://www.thegrannyattic.com
http://www.Illumion.net
http://www.sote.nl

rnolan

Hey Peter, if you wanted to toggle the loops and chorus while playing it's probably useful, I used the master vol today playing, it's fine if you stay in the same patch, if you change patches you need to sweep it so it takes over for that patch etc.
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

Harley Hexxe

Quote from: rnolan on July 17, 2016, 07:28:48 AM
Hey Peter, if you wanted to toggle the loops and chorus while playing it's probably useful, I used the master vol today playing, it's fine if you stay in the same patch, if you change patches you need to sweep it so it takes over for that patch etc.

    I have to go with Richard on this one. That is one of the coolest features of the Quad switch with my MP-2. I don't have to create different presets with Chorus In/Out, or Loop In/Out, when I'm playing live. The only beef I have with that though, and it's a minor one, is that when I go to a new preset, the Loop and Chorus are always on at the beginning of it. I just have to step on both buttons to cut them out if I didn't want them on at the preset change.


      Harley 8)
I only have two brain cells left, ...and I'm saving them for the weekend!

Peter H. Boer

Quote from: rnolan on July 17, 2016, 07:28:48 AM
Hey Peter, if you wanted to toggle the loops and chorus while playing it's probably useful
Loops are permanently on with me, so no need to toggle them.
The chorus I only use with sounds that are set-up completely different to the non-chorussed sound, so it always also means switching to a different preset.

Quote from: rnolan on July 17, 2016, 07:28:48 AM
I used the master vol today playing, it's fine if you stay in the same patch, if you change patches you need to sweep it so it takes over for that patch etc.
Don't you hear the MB-1 audibly switching between the 20 volume steps it has?
That's what stopped me using it, swells are not really possible to do, and that would be the only reason for me to use a volume pedal.



Nothing beats MB-1s and MP-1s with MDRTs

http://www.thegrannyattic.com
http://www.Illumion.net
http://www.sote.nl

rnolan

Hey Peter, I didn't notice the volume steps, it seemed smooth to me but I'll listen for that next time I use it.  It may be because there are 2 ways you can do the master vols.  If you use the "fixed" pallet Edit Pedal allocation (pallet 9), it operates on both tube and SS masters at the same time and also keeps their relative volumes to one another as you sweep.  Moreover, this is only taking up one pallet allocation.  The other way to do it is to assign 2 of the free pallets (eg P1 & P2), one to each master vol and assign the pedal to both pallets.  So this uses 2 pallets and may not keep the relative volumes ? and maybe then goes in the increments you are hearing ??

Hey Harley, do you have to have the parameter on in the patch so it will switch with the quad switch ?  You do with the MB1 chorus (says in the notes) but in MP2 I know I can toggle the tremolo and loop starting from off (I haven't tried chorus).
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

Harley Hexxe

Hey Richard,

    No, I didn't have to do anything with the Chorus on the MP-2. It is set to toggle that on and off from default. The funny thing is, when I go to a program with the Chorus set to "Off" in the saved program, it will be on when I load it. THe LED on the Quad will be off, so I have to toggle the button on and off again to cut out the effect.

      Harley 8)
I only have two brain cells left, ...and I'm saving them for the weekend!

rnolan

Hey Harley, well as you say that's not what's supposed to happen (I assume here that tremolo (B3), loop (B4) and tuner mute all work normally ?).
I need to have a read of MP2 CC now I understand it better and also work out the macros.
My initial thoughts are that it's maybe a latching missmatch issue (not the latch/momentary option in the quad switch (set with the dip switches)) but in the MP2.  This is talked about in the MB1 level 2 release notes (MP2 I need to read..), there's a global option for how the unit responds to latching (so if the chorus is staying latched when it shouldn't ???). The other thought is maybe it's a macro being triggered ? which turn chorus on ? Again need to read how macros work and what instigates/operates them, eg maybe the CC# of the chorus button is assigned to one ??  CC#s can be assigned to multiple things at the same time.
Anyway I'm guessing, but it definitely shouldn't be behaving like that.
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

MarshallJMP

BTW the MXC doesn't have dip switches, only the MC-1 has them to set the midi channel.

Harley Hexxe

Hey Richard,

    It has to be something in the default Midi programming. Both of my MP-2's do the same thing. To answer your question, you are correct, the Tremolo and Tuner mute remain off when I switch to a new program. I think I went into it a few years ago and did some kind of edit in the Midi settings to reverse that. I can't recall off the top of my head what it is at the moment, but I'll have to look in my #2 MP-2, as that one still has the settings in it.
   That's another nice thing about having the other MP-2. If I mess up the one I'm editing, a quick hook up with a short Midi cable and a Sysex dump puts everything back in working order in about 2 seconds. Of course, I also have an Alesis Data Disc, with all presets to every Midi piece I own stored on Disc. It does the same thing but for everything, both in and out of the rack.

      Harley 8)
I only have two brain cells left, ...and I'm saving them for the weekend!