• Welcome to ADA Depot - A Forum To Support Users of ADA Amplification Gear.
 

News:

Lets get Technical > All Things Tube All about preamp and power amp Tubes.

Main Menu

Face Plates

Started by DannyjoeCarter, December 27, 2016, 08:45:43 PM

Previous topic - Next topic

DannyjoeCarter

Folks as I mentioned to rnolan in another thread, back in 96' you could pick up a used ADA MP-1 for $80.00 here in Las Vegas and the only issue was if the faceplate was clean and undamaged. I used to call the guys at 420 Lesser Street at ADA and order them for around $50.00 or so if I remember right and have three in reserve. Not anymore though  :facepalm:

My question is, is there anywhere that has, or can reproduce the MP-1 faceplates either here in the US or Europe?
Owner of DeJayce Guitars
www.dejayce-guitars.com
www.youtube.com/dannyjoecarter
www.Faceb**k.com/dannyjoe.carter

DannyjoeCarter

OK wrong terminology Folks; I believe the correct term was called the membrane switch, is there anyone who would/could reproduce those or have one or two extra for sale?

Any advice much appreciated  :)
Owner of DeJayce Guitars
www.dejayce-guitars.com
www.youtube.com/dannyjoecarter
www.Faceb**k.com/dannyjoe.carter

rnolan

IIRC they can't be sourced new ??  You may be able to salvage one from a spare MP1 being used/scavenged for parts.  There's a post from ages ago (somewhere on here) where the guy attached a row of buttons to solve the problem.  It didn't look pretty but it worked. I think he kind off attached it to the front of the unit.  Given that (mostly) once you get your MP1 set you rarely touch the buttons, the switches on many units are still fine.
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

MarshallJMP

There are some company's that can reproduce them, problem is you need to buy it in some volumes, else it would be to expensive.

DannyjoeCarter

OK good to know, just wasn't sure.
I'll just make sure the units are clean looking and spend a little more money than a few I've seen that are around Reverb and Ebay in the last week.
Thanks again guys!
Owner of DeJayce Guitars
www.dejayce-guitars.com
www.youtube.com/dannyjoecarter
www.Faceb**k.com/dannyjoe.carter

MarshallJMP

I have a pristine faceplate with some buttons that don't work, so be careful and test them first.

DannyjoeCarter

You got it MarshallJMP. Currently I'm only able to buy from Ebay and Reverb seeing how no one has any for sale here in Vegas so I can't test them until I get the unit. I see tons of Pod racks stuff or AxeFX but have not seen an ADA here in years.
So it's why I'm buying several MP-1s just in case something is not functioning right.  :)
Owner of DeJayce Guitars
www.dejayce-guitars.com
www.youtube.com/dannyjoecarter
www.Faceb**k.com/dannyjoe.carter

MarshallJMP

Ok I understand, I also have 1 MP-1 and 3 backups  ;D