ADA Depot - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please note "Depot New Registrations Temporarily Suspended" Please see discussions for how to register.

Pages: [1]   Go Down

Author Topic: ADA SPLIT CAB QUESTION  (Read 721 times)

0 Members and 1 Guest are viewing this topic.

ADAddicted

  • Newbie
  • *
  • Offline Offline
  • Posts: 15
ADA SPLIT CAB QUESTION
« on: Time Format »

Hey guys... did these cabs come with some insulation inside from the factory? I purchased a pair from a local seller and when I looked inside to see the speakers there's some insulation in there. And do you guys think it really needs to be in there.Thanks in advance.
Logged
"Keep SHRED alive"

Dante

  • Administrator
  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 1955
  • Nothing more uncommon than common sense
    • The Best Cover Band In Sacramento
Re: ADA SPLIT CAB QUESTION
« Reply #1 on: Time Format »

I don't know if it NEEEDS to be in there, but I do believe they came with some inside. On at least 3 sides, I believe. Somebody correct me if I got that wrong

If it's in there, what's the harm of leaving it there? It doesn't weigh anything. If it ain't broke, don't fix it. Try to break it ;)
Logged
ADA Gear: MP-1 Classic | MP-2 | MicroTube 200 | MicroFet | MXC w/Quad Switch
Current Live Rig (wait 10 min., it'll change): Hughes & Kettner GrandMeister 40 Deluxe head into 1x12 speaker cab, using my Boss MS3 via 4CM & midi.
Current Rack rig: ADA MP-1 Classic running direct in the board, Boss MS3 in the FX loop via 4CM. Also have a MicroTube 200 running into two Yamaha 1x12 cabs for stage volume
Pages: [1]   Go Up