ADA Depot Too - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please note "Depot New Registrations Temporarily Suspended" Please see discussions for how to register.

Pages: [1]   Go Down

Author Topic: Make your MP-2 Rock like a 3TM!!  (Read 4021 times)

0 Members and 1 Guest are viewing this topic.

Dante

  • Administrator
  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 1869
  • Nothing more uncommon than common sense
    • The Best Cover Band In Sacramento
Make your MP-2 Rock like a 3TM!!
« on: Time Format »

Let me know how this works for you guys, I have yet to try it. I found this from something I printed off the old Depot in 2008.

Voicing: Dynamic High Gain
Drive: 72
Overdrive: 80
Master: 65

Compressor: out

Tone Controls
Low: +10
Mid: -4
Hi: +6
Pres: +8

Graphic EQ
100 Hz: +4
170 Hz: +2
280 Hz: -4
470 Hz: -2
800 Hz: -2
1.3 kHz: -4
2.2 kHz: 0
3.8 kHz: +12    <--- ???
6.3 kHz: +12    <--- ???

Wah: Out



Just by the looks of it, fizz city. YMMV
Logged
ADA Gear: MP-1 Classic | MP-2 | MicroTube 200 | MicroFet | MXC w/Quad Switch
Current Live Rig (wait 10 min., it'll change): Peavey Classic 20mh head into the matching 1x12 speaker cab, using my Boss MS3 via 4CM. Sometimes, I use a Hughes & Kettner Switchblade 50 with the MS3.
Current Rack rig: ADA MP-1 Classic into Boss GX700, running direct in the board. Also have the MP-2 in a 4u rack w/another GX700 and the MicroTube 200 running into two Yamaha 1x12 cabs.

Kim

  • Administrator
  • Hero Member
  • ******
  • Offline Offline
  • Posts: 830
  • If it's too Loud...you're gonna get more of THAT.
Re: Make your MP-2 Rock like a 3TM!!
« Reply #1 on: Time Format »

Yes.  I'll hit that tonight and let you know how it was.   :thumb-up:
Logged

Kim

  • Administrator
  • Hero Member
  • ******
  • Offline Offline
  • Posts: 830
  • If it's too Loud...you're gonna get more of THAT.
Re: Make your MP-2 Rock like a 3TM!!
« Reply #2 on: Time Format »

Well I did try this one out, and it was as I expected.  Really toppy....but does reminisce the 3TM I had back then.   I'd pull that top down a bit, but I didn't get to mess with it too much.   

Thanks for finding that and sharing!  :wave:
Logged

Dante

  • Administrator
  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 1869
  • Nothing more uncommon than common sense
    • The Best Cover Band In Sacramento
Re: Make your MP-2 Rock like a 3TM!!
« Reply #3 on: Time Format »

Sweet! I thought those settings looked awful bright
Logged
ADA Gear: MP-1 Classic | MP-2 | MicroTube 200 | MicroFet | MXC w/Quad Switch
Current Live Rig (wait 10 min., it'll change): Peavey Classic 20mh head into the matching 1x12 speaker cab, using my Boss MS3 via 4CM. Sometimes, I use a Hughes & Kettner Switchblade 50 with the MS3.
Current Rack rig: ADA MP-1 Classic into Boss GX700, running direct in the board. Also have the MP-2 in a 4u rack w/another GX700 and the MicroTube 200 running into two Yamaha 1x12 cabs.
Pages: [1]   Go Up