ADA Depot - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  

News:

Need a Schematic? Check the Vault *MP-1 Classic Schematics Just Added!!

Pages: [1]   Go Down

Author Topic: Pitchtraq Battery Replacement  (Read 1641 times)

0 Members and 1 Guest are viewing this topic.

frehley6986

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
Pitchtraq Battery Replacement
« on: Time Format »

Is there a battery mod/holder that works in the Pitchtraq similar to the MP-1?

If not what is the correct battery to replace it with? I don't know if mine is bad but I bought the unit used and
I'm guessing it should be replaced.

TIA
Logged

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 4702
    • marshalljmpmodshop.net
Re: Pitchtraq Battery Replacement
« Reply #1 on: Time Format »

Same as for the mp-1, you can use a CR2032 + battery holder
Logged

frehley6986

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
Re: Pitchtraq Battery Replacement
« Reply #2 on: Time Format »

Thank you
Logged

frehley6986

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
Re: Pitchtraq Battery Replacement
« Reply #3 on: Time Format »

I did the battery mod today on my Pitchtraq.

The battery holder didn't want to go in as the posts were a little too wide. I used my dremel and ground down the sides of the posts
on each leg of the holder. It then popped in and I soldered it up.

Thanks MarshallJMP
« Last Edit: Time Format by frehley6986 »
Logged

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 4702
    • marshalljmpmodshop.net
Re: Pitchtraq Battery Replacement
« Reply #4 on: Time Format »

No problem, glad I could help  :thumb-up:
Logged
Pages: [1]   Go Up