ADA Depot Too - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  


Board added for "Routing & Patching" in Lets Get Technical

Pages: [1]   Go Down

Author Topic: MB-1 Screw ????  (Read 3486 times)

0 Members and 1 Guest are viewing this topic.


  • Newbie
  • *
  • Offline Offline
  • Posts: 1
MB-1 Screw ????
« on: Time Format »

Hi Guys !!!  I just bought a new/old MB1 and i cant wait to try it in the studio but I am missing 3 screw and I would like to replace them !!! Can someone give me the exact name of the screw and the length of them so I can replace it !

I miss 1 screw on the top panel where you change the tubes and 1 screw on the front panel !

Thanks again !!!

John Mac

  • Newbie
  • *
  • Offline Offline
  • Posts: 11
Re: MB-1 Screw ????
« Reply #1 on: Time Format »

Probably the quickest way is to take one of each from the case and find a bolt shop. They should be able to supply for less than a dollar each. My local bolt shop is very helpful and wven supplied me with a longer nut for my truss rod in a cheap bass i ws trying to fix.
Practice rig: whichever bass i grab first -> MB1 -> mixer -> EPX3000 -> Realistic Mach 1 Hifi speaker with JBL K150
Live rig: bass as above -> Shure PGX -> MB1 -> EPX30000 -> 2x TL bins + 2x Fane angled 2x12 mids crossed over at 250


  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 3942
Re: MB-1 Screw ????
« Reply #2 on: Time Format »

The lenght is 1/4" but i can't remember the rest.
Pages: [1]   Go Up