ADA Depot Too - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  

News:

Lets get Technical > All Things Tube All about preamp and power amp Tubes.

Pages: [1]   Go Down

Author Topic: New fuse holder and a fuse  (Read 353 times)

0 Members and 1 Guest are viewing this topic.

Aelfad

  • Newbie
  • *
  • Offline Offline
  • Posts: 27
New fuse holder and a fuse
« on: Time Format »

While my MP-1 is still not working (I'll get to it soon I hope), I noticed that the fuse holder won't stay in place and needs replacing. My knowledge about fuses is pretty limited - all I know it that the rating must be the same, so can you educate me? Should I look into a glass or ceramic one? Also, the old one is filled with sand. Does it really matter?
Logged

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 3928
    • marshalljmpmodshop.net
Re: New fuse holder and a fuse
« Reply #1 on: Time Format »

You need a T 500mA (T= slow blow) 6x32 glass fuse. Filled with sand will also work but is more expensive.
« Last Edit: Time Format by MarshallJMP »
Logged

Aelfad

  • Newbie
  • *
  • Offline Offline
  • Posts: 27
Re: New fuse holder and a fuse
« Reply #2 on: Time Format »

Thanks, man!
Logged

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 3928
    • marshalljmpmodshop.net
Re: New fuse holder and a fuse
« Reply #3 on: Time Format »

No problem, let me know if you have more questions.
Logged
Pages: [1]   Go Up