ADA Depot Too - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  

News:

Board added for "ADA Cab Sims" in Other ADA Gear (coz El asked for it LOL)

Pages: [1]   Go Down

Author Topic: MP-1 V2: FET Questions  (Read 253 times)

0 Members and 1 Guest are viewing this topic.

Fdesalvo

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
MP-1 V2: FET Questions
« on: Time Format »

Hi, all.

Long time lurker. So glad this site iis back up.

Ive got a v2 MP1 and am refreshing the caps and have moved on to the fets/jfets/etc. I have a couple of questions due to my ignorance of all things FET and the dearth of info for the v2 online.

1. I am unable to locate replacements for Q1/2: K364 GR91. Are these “2SK364’s” that I’m seeing referenced elsewhere?  I have some updated equivalents on hand (LSK170’s) if this is the case.

2. Q3/4 are MPSA92’s. I have these on hand, but is there a higher performing equivalent out there?

Many thanks for the help/education. I build all analog vacuum tube amps and do restorations on a variety of preamps, but venturing into the digital/ss realm has been eye-opening, if not exciting.

Best regards,

Frank
“Ruining good moments since 1975.”


Logged

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 3649
    • marshalljmpmodshop.net
Re: MP-1 V2: FET Questions
« Reply #1 on: Time Format »

Yes these are 2SK364 (in rare cases 363), but why do you want to change these?
Same with Q3/4, no need to change them, if they work they work.
Logged

Fdesalvo

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
Re: MP-1 V2: FET Questions
« Reply #2 on: Time Format »

Yes these are 2SK364 (in rare cases 363), but why do you want to change these?
Same with Q3/4, no need to change them, if they work they work.

Thanks for the response. I can’t imagine how busy you are.  I’m looking for other areas to reduce background noise if possible. 
Logged

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 3649
    • marshalljmpmodshop.net
Re: MP-1 V2: FET Questions
« Reply #3 on: Time Format »

Well you could replace all the resistors with metal film, also replace those 33µF caps on the tubeboard with 10µF except C13.
Logged

Fdesalvo

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
Re: MP-1 V2: FET Questions
« Reply #4 on: Time Format »

Thank you for your advice. I’ll give that a whirl.
Logged
Pages: [1]   Go Up