ADA Depot Too - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  

News:

Temp "Time Format" issue Fix in Discussions

Pages: 1 [2]   Go Down

Author Topic: OD 2 Clip  (Read 7147 times)

0 Members and 1 Guest are viewing this topic.

darralld

  • Newbie
  • *
  • Offline Offline
  • Posts: 44
Re: OD 2 Clip
« Reply #15 on: Time Format »

I turned the OD 1 trimpot down all the way. Raised OD 1 to 10 then lowered my pickups until the clip light stopped coming on. I think it sounds so much better this way. Can also get a pretty nice brown sound out of it now. Before I did this the clip light would come on around level 6. That left a bunch not getting used. I haven't messed with the trimpot for OD 2. I wonder if raising the level to 10 then lowering the trimpot would get rid of some unwanted noise that I get out of the unit? Buying these things used gives you no idea of what a previous owner may have done to it.

Darrall
Logged

trader144

  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
Re: OD 2 Clip
« Reply #16 on: Time Format »

Where did you have OD2 set when you started raising OD1?

Logged
Guitars: Malmsteen strat, Fender '62 reissue
Rig: Avid 11 Rack -> ADA MP-1 (stock) ->  ADA Microtube 100 -> ADA split stack

darralld

  • Newbie
  • *
  • Offline Offline
  • Posts: 44
Re: OD 2 Clip
« Reply #17 on: Time Format »

The tubes will have an impact on the settings. But I have OD 1 at 5.0 & OD 2 at 2.4.
Logged

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 3756
    • marshalljmpmodshop.net
Re: OD 2 Clip
« Reply #18 on: Time Format »

Tubes will have no impact on the OD2 led.
Logged

darralld

  • Newbie
  • *
  • Offline Offline
  • Posts: 44
Re: OD 2 Clip
« Reply #19 on: Time Format »

Sorry, I wasn't talking about the led. I was talking about my settings. As far as adjusting the trimpot, I had OD 2 down to zero. OD 1 up to 10 & the trimpot all the way down. Then adjusted my pickup until the led stopped coming on. Maybe it doesn't matter if the light is on or not. But it sounds better to me.
Logged

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 3756
    • marshalljmpmodshop.net
Re: OD 2 Clip
« Reply #20 on: Time Format »

Aah sorry my bad.Now it's normal that the od2 led blinks at a setting of 6.0.
Logged
Pages: 1 [2]   Go Up