ADA Depot Too - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  


Temp "Time Format" issue Fix in Discussions

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Kim

Pages: [1] 2 3 ... 41
Effects / Re: Let's see your pedalboards!
« on: Time Format »
So far, this is the latest iteration of my pedal board...I think...wait ten minutes, it's gonna change....wait....

Pretty much sums up every pedalboard.   :lol:

So here's mine for the Update....again.

Pared it down a bit.  Found that the Saturnworks Buffered Splitter was actually redundant on this board because the EHX "9" pedals could do that themselves, so that went to the Home stash.  Also decided (for now anyway, right?) that the EHX Soul Food wasn't really needed where I had it previously, so it too went to the Home collection.  Wait...what?  There's empty space on the board?  lol Thinking about adding a stomp tuner if I find one I like. 

Effects / Re: Radial Tonebone Hot British
« on: Time Format »
But I got a deal on this

Dante if yer reading "But I have a blackstar"..............jesus  :facepalm:  I still think their amps are shit  :lol:  But this pedal sounded like I might be able to use it as my main pre for my flight rig!

So lets see what this pedal can offer me once it arrives. 

From what I can tell from the vid, that pedal might just be what you need.    :thumb-up:  Of course a demo vid doesn't really = IRL though.  Not a fan of Blackstar either, but I am a fan of using what works.  Maybe put a piece of tape over the logo if it bothers you?  lol  I believe this could really work for you after some tweaking of the controls (then Sharpie them to mark the settings so they can be put back immediately after getting moved around during transport).

Guitar Wiring / New Wiring Help (part 2)
« on: Time Format »
  For some reason or another I cannot access the original "New Wiring Help" thread whilst Logged In.   :dunno:  In the meantime, here's Part 2.

After playing around with some initial pickup wiring ideas since switching to DiMarzio pups last year, I've decided on the final wiring job for my guitars.  Systematic Chaos found this one for me earlier, but I hadn't tried it out until just recently when I installed those fancy-dancy nickel covers on my Black guitar.  Loved it so much, I rewired the other guitar the same.   One difference though is that the schematic shows that the inside coils of both humbuckers are the ones that stay on (due to the fact that the Neck pup in the schematic is installed upside down or something?) but mine uses the inside coil of the Bridge and the outside coil of the Neck instead when I pull the Volume knob up....and that's just absolutely perfect for me.   :whoohoo!:

So, THANK YOU once again to Systematic Chaos for getting me to try some DiMarzio pups, and for getting an awesome wiring schematic to me as well!  :bow:


Guitars / Re: NPupsD!
« on: Time Format »

Still loving the Breed and PAF Pro.   :thumb-up: 

But....this is the look I wanted for this particular guitar so I found new nickel covers from DiMarzio and added them! 

Amps / Re: Koch ATR-4502 Power Amp
« on: Time Format »
I know that it's not easy to find a light, loud and good sounding amp. At some point you always have to sacrifice something.

There's a saying I know of:

The 3 important things about building a race car are Fast, Reliable, and Cheap.  You can only have TWO of those things.

So applying that logic to amplifiers:
Loud, Light, Cheap.  You only get two.  Lol

Amps / Re: NAD: Peavey JSX
« on: Time Format »
Toggle switch fixed and I now have all 3 channels available.   :whoohoo!:

Still say I am pretty impressed with this in person.  Lots of great tones already in there, and I don't max out the Gains to 10 either.   6 and 7 are plenty for me.  And besides the 3 channels I own 3 different Drive pedals that I can put in front and the amp responds to them just beautifully (something I'm sorry I can't say about the MP-2 or QuadTube.)  :dunno:  The Noise Gate isn't so much of an actual "gate" that shuts down as it is a "noise reduction" that takes away the extra hiss.   Speaking of noise, the amp head is dead quiet in operation with no mechanical buzz or hum from the chassis.  Every tube amp I've ever tried has had some sort of mechcanical buzzing or humming coming from inside and I always thought it to be normal.

Oh, and then I even put some good hearing protection on and wound it right up for a bit.  Apparently, the "JSX" stands for "HOLY F***KING SH*T"    :lol:   :metal:

Amps / Re: Koch ATR-4502 Power Amp
« on: Time Format »
Oh I know, I'm just curious to see if this 90watt hybrid is as loud as a SS 300watt amp.  That's my bench mark currently so I need the same or me for me to make it work with my rack gear.

There's two things to also consider here. 

The perceived volume is not linear with wattage ratings. 
If you compare the maximum volume of say a 50 watt amp with a 100 watt amp, the difference is only going to be 3 dB....not much of a difference.  It would take an amplifier with 10 times more power  to be perceived as being twice as loud; a 10 dB increase.  It'll take 500 watts to sound twice as loud as 50 watts.   :o

A "hybrid" amp is...... still a Solid State amp. 
There's a tube or two attempting to add some "warmth" of the soft-clipping even-order harmonic distortion, but the final link to the speakers is still within the S.S. realm with transistors, Mosfets, etc.  Comparing the 90 watt hybrid to the 300 watt SS amp is comparing two Solid State poweramps.  Apples = apples.

Having put that out there now, if the 90 watt amp fits your travel weight requirements, then IMO it should do the job.  3-4 dB difference shouldn't be the deciding factor here.  And since the price might be perfect (free endorsement?) if the deal is made....well if I were in your shoes I'd just say "Yes please".  :)

Assuming the FX unit can use one Input and be Mono.  Of course, you could also have TWO guitar amps to make your rig Stereo.....

Here's two ways to configure the MP-2 with an fx unit and stereo poweramp.  The specific brand/model of the FX unit and poweramp may vary for your application; the ones listed in the drawings are simply the ones I happen to be using.

Discussions / Re: Guitar Playing Fatigue
« on: Time Format »
I used to keep my action a bit higher than normal because of my inherit "heavy-handness" but I've been gradually adjusting it down lower over the last year or so.  Now it has that "butter" feel which I am appreciating more and so I've been making a conscious effort to play with a lighter touch and some more finesse.  I find that when my fingers start to fatigue, it's mostly because I'm squeezing too hard so I remember to lighten up some.

But it's not because I lack the initial finger strength; I probably have more strength that what my joints can manage because I've been working in the steel-related business for about 25 years now, (with temporary pauses over those years to do electrician and factory maintenance/tech work) and if I'm honest I'm running out of parts of my body that don't hurt!   

That Cherry b*mb graphic/font on that Solo Boost though.....    :thumb-up:


Amps / Re: NAD: Peavey JSX
« on: Time Format »
If I remember correctly, this was more or less a souped up Triple X, right? 

IIRC, it was based off the Triple X which btw was originally designed for George Lynch to be his signature amp to endorse, but somewhere along the way before actual production the deal fell through so it was released as just the Triple X.

The way I understand it is that the Clean and Ultra channels are the same between the two amps while the Crunch channel of the JSX has a "more mids" type of sound than the Triple X Crunch.   Truth be told, I haven't even tried the Ultra channel on mine yet because I need to replace the busted toggle switch in order to access that (and because of that is why I got such a screaming deal on the price)  I'll also tell you that the Youboob videos of this amp do it no justice...this things RIPS even in Crunch mode.

Amps / Re: NAD: Peavey JSX
« on: Time Format »
Wow, a built in DI/Cab sim box, cool.  The speaker label is confusing though. So I guess it has 4 x 16ohm 12s in a parallel/series combination and the whole box is 16ohm and the 2nd (parallel) jack is for another 16ohm cab (amp then sees 8ohms)

I believe so.  And the amp also has a pair of parallel Output jacks and a switch to select 16, 8, 4 ohms.  So maybe it can run a total of four 16-ohm cabs with the switch set at 4-ohms?   >:D  I sure don't need to do that!   :o

Amps / Re: NAD: Peavey JSX
« on: Time Format »
DAYUMMM, that is a nice rig. What're you gonna do with that? You already have your rack rig ;)

The Rig of Fire (rack rig) is the rig that stays at the band's rehearsal studio and gets gigged with. This JSX is staying at home for my recording projects because I have so many options to use with different poweramp tubes, pedals, etc. for whatever I come up with.

The JSX cab will handle 400 watts (so should last forever) and even has an XLR DI on the back, should I ever want to just hit the "Easy" button. Attached is a pic that I grabbed from the web....

Pages: [1] 2 3 ... 41