• Welcome to ADA Depot - A Forum To Support Users of ADA Amplification Gear.
 

News:

Need a Schematic? Check the Vault *MP-1 Classic Schematics Just Added!!

Main Menu

Digitizer 4 Noisy Transformer

Started by kissfan113, September 13, 2022, 07:21:41 PM

Previous topic - Next topic

MarshallJMP


kissfan113

The setup you mentioned in the post before mine about the testing procedure using a meter on the fuse area.

MarshallJMP

Ah yes ok understand now. I will do that tomorrow and post some pics.

kissfan113

MarshallJMP, I got to digging around and found my old Simpson 260 meter it will measure milliamps quite precisely if that helps us sort things out
Kevin

MarshallJMP

For better accuracy a true RMS meter is better but it will do the job. Haven't got around taking some pics, I'll do that tomorrow.

MarshallJMP

I atytached some pics. Unplug the digitizer !!! Remove the fuse, hook up some crocodile clips on the connections of the fuse holder. Then connect these to your meter, one on the com one to the current input. (polarity doesn't matter) Set the meter to AC current (500mA). Plug in the Digitizer, turn it on and measure the current.

Now be very carefull this is mains voltage !!!!!!!!

kissfan113

MarshallJMP, thanks for the pictures, I will try to do some diagnostic work this weekend and let you know the results. I'll see what I can come up with for a true rms meter and the Simpson 260 analog meter is sitting on my bench right now as a standby.
Kevin