• Welcome to ADA Depot - A Forum To Support Users of ADA Amplification Gear.
 

Stock Gain Mod

Started by Dna^Yay, March 28, 2014, 03:21:14 AM

Previous topic - Next topic

Dna^Yay

Hello all

Was contemplating doing the stock gain mod so my MP-1 stays near enough stock but with some extra gain. Was wondering who has done this and also what your opinions are on the mod?

Also i have passive pickups in my Vigier and removing Input Fet Buffer circuit in the mod apparently will suck tone out of passive pickups, but i was wondering if i am running a compressor before the amp could i have the best of both worlds and not experience the tone sucking and have less noise? Or would i need to use a pedal with buffered bypass or just get a booster pedal e.g. TC Spark Booster, MXR Microamp etc

MarshallJMP

Removing the input buffer for less noise and then adding an external booster to compensate will be useless and will add more noise.So leave it like it is.

Dna^Yay

Quote from: MarshallJMP on March 28, 2014, 04:07:42 AM
Removing the input buffer for less noise and then adding an external booster to compensate will be useless and will add more noise.So leave it like it is.

Is there anyway to get the benefit that an active guitar has when the circuit is removed at all?
So not even an eq or volume boost would help?

MarshallJMP

Again leave it like it is,i did some experiments with it and there are no benifits with removing the input buffer.

Dna^Yay

Ok so that part of HB`s Stock Gain Mod i should not do, it is only beneficial if i have an active pickup guitar?