• Welcome to ADA Depot - A Forum To Support Users of ADA Amplification Gear.
 

News:

Need a Schematic? Check the Vault *MP-1 Classic Schematics Just Added!!

Main Menu

preset change via MIDI problems

Started by j4q0, November 23, 2018, 07:38:12 AM

Previous topic - Next topic

j4q0

Bit of story first: I had a Classic for a LOT of years and a few years back I decided to sell it as I was hadn't been using it for a long time. Of course I ended up missing it after a while. I recently found one close to where I live at a good price and decided to buy it. Brown channel is as good as always.

Now, My old unit always had a lag when switching between presets, and I had a thread here on the forum asking about that, some people had the same experience and some people didn't have this. With this new unit I still experience the same lag. After many years I've become accustomed to this and I hide this small silence in my playing, just had to get a bit creative with some rhythm strumming.

On this unit the program change via MIDI is also acting funny in that sometimes the unit will change to preset 01 no matter what button I press on the MIDI controller, although if I keep pressing the desired button on the controller, after a few tries the MP1 Classic goes "ah, you wanted this" preset, here it is"
I can rule out the controller not working properly as it controls all the other MIDI equipment just fine.

Has anyone had a problem like this?
I remember reading something about resetting the MIDI memory, I'd like to give this a try to see if but I have no idea how to do this. Does anyone know how to do this?

Thanks in advance for your replies.

MarshallJMP

Check the manual for "loading one to one midi mapping" on p12.

j4q0

I already reset the 1 to 1 mapping and the unit is still behaving in the same way.

rnolan

I don't know if it's the same for the classic (which came after the MP2 and shares a number of features), the MP2 had quite a lag when first it first came out, ADA released a new EPROM which included a fast change option which fixed it. Some ways that may help clear and reset things, remove the EPROM and put back (carefully), or remove the CPU and put it back, or disconnect and then reconnect the memory battery.
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

MarshallJMP

Try this, hook the midi controller to the classic midi in and the midi thru to another midi device, see if the other device switches presets.

j4q0

#5
I know this is an old thread but this weekend I realized I never replied to this.

It seems that MIDI information degrades after 6 units being chained together by their MIDI THROUGH port.
The last unit in the chain always shows similar problems, some units recall MIDI program 1 regardless of what the Program Change from the controller is, and other units recall different MIDI Programs altogether that don't match what the controller is sending.

I tested each unit by itself with the MIDI controller and they were all working properly.
In order for a 7th unit in a chain to respond correctly to MIDI Program Changes, it needs to be fed from the MIDI OUT port of the previous unit.

Hopefully this can help anybody that is having similar problems.

My MP1 Classic still needs to have the battery replaced though. Why the battery is still soldered to the board on the 3rd iteration of the ADA preamp is still a mystery to me, there must be a good reason for this.


MarshallJMP

I think the max units that can be chained is 4 (midi protocol). You could use a midi splitter?

j4q0

I never had the need to use more than 2 units until now So this was a first for me.
Having the last 2 units connected via the MIDI Out instead of the MIDI through solves the problem. Thankfully all units are doing a 1 to 1 program change so it's simple enough to not warrant a solution with a splitter.

MarshallJMP

That will work too, but it's a bit slower than using the thru