ADA Depot - A Forum To Support Users of ADA Amplification Gear
Let's Get Technical => All PREAMP Tech Tips & Support => Topic started by: Gemini75 on February 16, 2014, 02:20:19 PM
-
I'd like to record the ADA MP-1 I'll be getting soon directly using my Line 6 UX1 as an interface, but was told I'd have trouble with clipping. I've also been told that I wouldn't. That said, just wondering if anyone here had any advice they'd like to share on the matter.
-
The Line 6 UX1 is not an optimal choice for line level inputs such as the main outputs from the MP-1. The Mic input will definitely be a problem, while the guitar input is not much better. On top of that, the UX1 has only one of each, so accommodating the stereo MP-1 is another problem.
I suggest you get a more suitable interface with at least two line level inputs.
If that is not possible, you could try recording just one channel of the MP-1 (left) into the guitar input. You may have to use the MP-1 headphone output, which has a level control that you can use to avoid clipping. A better solution would be to use an Ebtech line level shifter to convert the MP-1 output to instrument level.
-
I have Behringer Ultra G DI box that can reduce the gain -40 dBs. Would that be enough to avoid clipping or would something like this be more effective?
http://www.sweetwater.com/store/detail/LLS2?device=c&network=g&matchtype=&gclid=CPGl-6qZ07wCFY1r7AodAmQA-Q (http://www.sweetwater.com/store/detail/LLS2?device=c&network=g&matchtype=&gclid=CPGl-6qZ07wCFY1r7AodAmQA-Q)
-
The UX1 will work just fine. It has stereo line inputs on the back of the unit. I have one & used my MP-1 with it a few times before I sold it. To be honest you will probably like the sound of putting a mic on the cab better then going direct. You can get some awesome tones with the software that comes with the UX1.
Darrall
-
The UX1 will work just fine. It has stereo line inputs on the back of the unit. I have one & used my MP-1 with it a few times before I sold it. To be honest you will probably like the sound of putting a mic on the cab better then going direct. You can get some awesome tones with the software that comes with the UX1.
Darrall
I've got some really good sounding Splawn T75 IRs, so I'm good on that end.
Could you please tell me how you were running your MP-1 with your UX1? For instance, what lines were you running out of the MP-1 and into what lines on the UX1?
-
Output A & B of MP-1 into the Line Inputs on the back of the UX1. I would pick the tube power amp in the line 6 software. But you might find a better way to do it.
Darrall
-
Output A & B of MP-1 into the Line Inputs on the back of the UX1. I would pick the tube power amp in the line 6 software. But you might find a better way to do it.
Darrall
Thanks for the "how to" tips.
I was thinking of just running the MP-1 into Reaper and then adding some IRs and a preamp.
-
Output A & B of MP-1 into the Line Inputs on the back of the UX1. I would pick the tube power amp in the line 6 software. But you might find a better way to do it.
Darrall
I tried this, but am not getting any output signal on my DAW.
-
Did you change it to recognize that you were plugging into the line inputs and not the guitar or mic input?
-
Did you change it to recognize that you were plugging into the line inputs and not the guitar or mic input?
Forgot to reset the outs to be recognized. Is working fine now. Thanks.