I had this problem a few weeks on tube voicings 7-10 then it went away. I took my amp a friend's house and the low buzzing sound started. I opened up the mp2 and the capacitor closest to tube 1 fell off. What's the best method of fixing this? Buy another capacitor and resolder? Also, where does the positve and negative connect?
Buy a new one, get the old wires from the cap out and put a new cap in it. Polarity is printed on the pcb.
What does PCB mean? Where can I buy a new one? The one I have says - TEAPO- 10uF 350V, SEK 85C, 07/93(M)
PCB means printed circuit board.Any electronics store should have these, or online somewhere. (mouser, digikey etc..)
Finally got around to doing it today, and it was easier than I thought. Everything working fine now.
Thanks!
Okay great :thumb-up: