Hi to all.
This is my first post as a new member.
So hope all goes well :)
Lately my MP-1 has developed issues with the tube voicings.(clean and distortion)
When I power up the unit , there is no sound from the tube voicing after a few minutes .
Before the tube voicing shuts off , I hear a sort of crackle
There is sound when I switch to solid state.
If I switch off and on , the tube voicing issue is still present.
The only way that the tube voicing returns temporarily is if I switch on the unit after a few days that is the unit has been switched off.
I even swapped the tubes with other functioning tubes , but still the issue is still present.
Has anyone encountered a similar issue in the past ?
I tried searching the forum , but I did not manage to encounter a similar issue
I would like to keep using the mp-1 . I strongly believe that there is no gear that matches its tone qualities.
Thanks for any help you can provide.
Regards
Paul
Just send you an email
Hey Paul, I sure MJMP will hep you get it solved. Sounds like a component has become heat sensitive to the point it breaks down.