ADA Depot - A Forum To Support Users of ADA Amplification Gear
Miscellaneous => Introduce Yourself => Topic started by: Casey_Butt on November 27, 2014, 07:48:35 AM
-
I've been scanning ADA Depot for years, but only recently got an MP-1. Before that I was engrossed in modding MicroCabs, and got the original schematics from the old site... thanks!
I'm an electrical engineer (PhD) and have been playing guitar since the mid-'80s... so it's only natural that I break out the soldering iron sometimes. ;) I'm not intending to do much to the MP-1 though... I like it the way it is. I'll probably re-cap it and do some things to lower noise, but I don't have any tone modifications in mind. I have other gear, so I don't need the MP-1 to cover territory other than be an original MP-1.
-
Hey and welcome to the depot :thumb-up:
-
Hey Casey, welcome to the depot, and thanks for your posts on cab sims BTW adds a very appreciated dimension to the discussions, a little measured rigor to a very subjective topic :thumb-up: i.e. how does it sound (but why?..).
Cheers R
-
Well, the stock MicroCab is most of the way there on its own, but it's more 'generic' than matched to any one particular cab. The modded version more closely emulates specific cabs that I tweaked it to match... and it doesn't sound as comb filter-y because the frequency notches aren't as deep (unless I turn the "Depth" knobs 'off').
I have both channels voiced differently, one to match a certain set of cabs and the other channel emulates a different group of cabs, so if you use it in stereo you get an effect like having a different cab in the L and R channels. I have some clips recorded through it... I'll try to share them here somehow.
It sounds really good. I've practically completely given up on miking cabs. ;D