ADA Depot - A Forum To Support Users of ADA Amplification Gear

Let's Get Technical => Troubleshooting Problems => Topic started by: BoWeevil2017 on February 21, 2017, 12:25:19 PM

Title: MB-1: Brand New Tubes, no sound on "Edge" or "Full" settings...
Post by: BoWeevil2017 on February 21, 2017, 12:25:19 PM
Hey all,
I just switched out what I believe are stock 12AX7A tubes in my MB-1 for a pair of brand new Sovtek 12AX7 LPS.
Unfortunately, i am not getting any sound whatsoever out of the tube channel when I select either "Edge" or "Full".
The "Clean" setting, however, works as expected.
If I replace the old tubes, everything works just fine.
Thoughts?
Title: Re: MB-1: Brand New Tubes, no sound on "Edge" or "Full" settings...
Post by: MarshallJMP on February 21, 2017, 12:57:24 PM
The MB-1 uses one tube for the cleans and the second is only used when you select edge or full so one of the tubes is dead.