Is there a battery mod/holder that works in the Pitchtraq similar to the MP-1?
If not what is the correct battery to replace it with? I don't know if mine is bad but I bought the unit used and
I'm guessing it should be replaced.
TIA
Same as for the mp-1, you can use a CR2032 + battery holder
Thank you
I did the battery mod today on my Pitchtraq.
The battery holder didn't want to go in as the posts were a little too wide. I used my dremel and ground down the sides of the posts
on each leg of the holder. It then popped in and I soldered it up.
Thanks MarshallJMP
No problem, glad I could help :thumb-up: