• Welcome to ADA Depot - A Forum To Support Users of ADA Amplification Gear.
 

Pitchtraq Battery Replacement

Started by frehley6986, February 11, 2021, 06:17:20 AM

Previous topic - Next topic

frehley6986

Is there a battery mod/holder that works in the Pitchtraq similar to the MP-1?

If not what is the correct battery to replace it with? I don't know if mine is bad but I bought the unit used and
I'm guessing it should be replaced.

TIA

MarshallJMP

Same as for the mp-1, you can use a CR2032 + battery holder


frehley6986

#3
I did the battery mod today on my Pitchtraq.

The battery holder didn't want to go in as the posts were a little too wide. I used my dremel and ground down the sides of the posts
on each leg of the holder. It then popped in and I soldered it up.

Thanks MarshallJMP

MarshallJMP