• Welcome to ADA Depot - A Forum To Support Users of ADA Amplification Gear.
 

News:

Lets get Technical > All Things Tube All about preamp and power amp Tubes.

Main Menu

a Solid State Tube?!?

Started by Dante, July 21, 2023, 09:06:52 AM

Previous topic - Next topic

Dante

WTH? Has anyone seen one of these Solid State 12ax7ws tubes?

Check 'em out here

https://amtelectronics.com/new/amt-12ax7ws-le/



Harley Hexxe

I only have two brain cells left, ...and I'm saving them for the weekend!

Dante

If it's anything like modelers...'it sounds a lot like a tube amp' haha

rnolan

Wow, interesting idea although not cheap @ 50 Euros.  Then they never need to be replaced.  So they say they sound the same a tubes, but we all know that tubes vary allot in their sound/tone etc. so "which tubes".   Also the warning (Before you buy, make sure that the anode (plate) voltage in your device at is least 30V.)  @MJMP is the anode (plate) voltage in ADAs compatible??
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

MarshallJMP

The anode voltage in most ADA's is around 100V.

Harley Hexxe

Does anyone know what the "12AX7 Warm Stone" is that they are referring to?

Is it an actual tube or an earlier solid state version of this?
I only have two brain cells left, ...and I'm saving them for the weekend!

rnolan

Hey Dante, there's a pic of it at the link you posted.  It's the one with the aluminium base (ring at the bottom) in the pic, the others are clear all the way.  So they say the only difference is by excluding the aluminium, it saves money and the Warm Stone and Le version are otherwise identical, with the Le cheaper because of the saving in both manufacture and material.  They say the aluminium looks cool but serves no other purpose. 

My main issue with what they have done is that they seem to assume all 12AX7s sound the same.  As we all know they don't.  If you could tweak the circuit to mimic different brands/designs (e.g. long plate vs short plate etc.) it maybe worth trying??  Possibly it word work ok in V2?  with the tone created in V1 by a tube of your choice. 

Also there is a big difference between what we want our input tubes to do (clip and distort the way only tubes can (around even harmonics)) and what a HiFi buff wants (clean, clear maybe a little warmth).  They say [Blind tests show no difference in sound character between WS and vacuum tubes].  This may be so in a HiFi preamp but what about guitar preamp stages? 

I'm not sure, based on what's on their site, I'd want to trump up $200 AUD + postage to test them. 

The other place they may be ok is poweramp input buffers or phase splitters where you don't necessarily (in our rigs anyway) want to add distortion.
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few