Hi guys my first post in here and I hope I'm posting this in the right place.
I've opened up my MP-2 to start working on the noise mod. However when inspecting the board itself I noticed there is a resistor missing in D102 (schematic reference) on the board. D-102 is right next to the ROM chip. If someone could open up their MP-2 and verify that they have a resistor in that spot, and possibly what kind it is, I would be extremely grateful! Thanks! I've attached the Load chart if that helps you find it easier. :-)
Can't see a D102 (D stands for diode),are you sure it's a resistor?Maybe you mean C102?
Pretty sure its D102 Here is a screen shot from the Schematic, I've circled the spot. For reference U100 is the OS EPROM. Its definitely D just check the board, so it must be a diode. I'm not sure if the diode is missing or this is just an unused spot. So I need to confirm it is also not empty in another unit. If it's not empty what kind diode is in that spot so I can order one. Thanks!
It's D106 and i checked all 3 of my MP-2's and none of them have the D106.So no need to worry.
Oooops yeah D106. Hehehe thank you sir!!! Much appreciated! Feel much better now! :D
No problem,just buy me a beer next time :lol: