• Welcome to ADA Depot - A Forum To Support Users of ADA Amplification Gear.
 

MT200

Started by Soloist, March 09, 2016, 09:46:36 AM

Previous topic - Next topic

Systematic Chaos


rnolan

Hey SC, just wanted to say I really appreciate you finding all this stuff for us all  :thumb-up:
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

Soloist

I put a pair of Tung Sol reissues in the MT200.. and WoW!! Nice warm tone! :thumb-up:

Now, on the Mesa 50/50 I was reading that V2 and V3 are both phase inverters :facepalm:. V1 splits the signal to each side. Can someone confirm this? MJMP? SC? rnolan? Anyone?
Live Rig:
Fractal Audio FM3 ver 1.06
Boss GT 100 ver.2.11
Switching- Radial Engineering Big Shot I/O v2 - Radial Engineering Pro D2 Stereo Direct Box
Power - Live Wire Power Conditioning Distribution System
Monitors  - (2) FRFR-112 Headrush Stage monitors
Axes - Charvel So Cal Pro Mod-Jackson DK2MQ Pro-Jackson USA Soloist-Ibanez RG3XXV
ADA gear: MP1- MP2 - MT200
Studio gear- way too much to list.

Systematic Chaos

Correct! Is that the old 50/50 or the new one?

Soloist

I think it's a newer one. Blue power light on it.
Live Rig:
Fractal Audio FM3 ver 1.06
Boss GT 100 ver.2.11
Switching- Radial Engineering Big Shot I/O v2 - Radial Engineering Pro D2 Stereo Direct Box
Power - Live Wire Power Conditioning Distribution System
Monitors  - (2) FRFR-112 Headrush Stage monitors
Axes - Charvel So Cal Pro Mod-Jackson DK2MQ Pro-Jackson USA Soloist-Ibanez RG3XXV
ADA gear: MP1- MP2 - MT200
Studio gear- way too much to list.

Systematic Chaos

I'll mail you some MB docs

Soloist

Live Rig:
Fractal Audio FM3 ver 1.06
Boss GT 100 ver.2.11
Switching- Radial Engineering Big Shot I/O v2 - Radial Engineering Pro D2 Stereo Direct Box
Power - Live Wire Power Conditioning Distribution System
Monitors  - (2) FRFR-112 Headrush Stage monitors
Axes - Charvel So Cal Pro Mod-Jackson DK2MQ Pro-Jackson USA Soloist-Ibanez RG3XXV
ADA gear: MP1- MP2 - MT200
Studio gear- way too much to list.

MarshallJMP

Hey Soloist,do you got what you need from SC?

rnolan

Well that's an interesting way to do it, so V1 is the buffer tube for both channels (one triode each) and V2 and V3 are the PIs, one per channel to drive the output tubes (which I assume there are 2 per channel in push/pull)
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

Soloist

Quote from: MarshallJMP on March 18, 2016, 02:57:28 PM
Hey Soloist,do you got what you need from SC?
Yes I do! Thanks Guys :thumb-up:
Live Rig:
Fractal Audio FM3 ver 1.06
Boss GT 100 ver.2.11
Switching- Radial Engineering Big Shot I/O v2 - Radial Engineering Pro D2 Stereo Direct Box
Power - Live Wire Power Conditioning Distribution System
Monitors  - (2) FRFR-112 Headrush Stage monitors
Axes - Charvel So Cal Pro Mod-Jackson DK2MQ Pro-Jackson USA Soloist-Ibanez RG3XXV
ADA gear: MP1- MP2 - MT200
Studio gear- way too much to list.

Systematic Chaos

Quote from: rnolan on March 18, 2016, 05:26:04 AM
Hey SC, just wanted to say I really appreciate you finding all this stuff for us all  :thumb-up:

All cool bros!
I did some mods and maintenance on some Boogies ;)

DorsetRatt

Quote from: Systematic Chaos on March 18, 2016, 01:38:21 AM
Mesa 20/20 Deep Mod:
http://forum.grailtone.com/viewtopic.php?f=5&t=31723

Thanks for the link SC. I've got the deep mod on the 20/20, it was done by the previous owner ... I have no idea what the 20/20 sounds like as standard, but consensus of opinion seems to favour the modded version.

I'll try some different tubes for the PI positions, probably the 12AX7LPS that you've mentioned previously. If it doesn't work out for me I'll try the 12AT7, I can reuse the 12AX7LPS and install them in my SP-77 (I seem to remember Soldano recommending the Sovteks).

MJMP, under-biased power tubes are a concern ... it wouldn't surprise me if they were, I think perhaps it's a Mesa tube strategy. It's a little frustrating that the bias is not easily adjustable (trimpots, etc), so I'd be really out of my comfort zone.
Preamps: MP-1, MP-1 Classic, MP-2, Soldano SP-77, Piranha
Guitars: Sutch Siran Headless, Palm Bay Tidalwave, ESP M-1, Gibson Flying V

Several Species of Small Furry Animals Gathered Together in a Cave and Grooving with a Pict

Systematic Chaos

I don´t have the schematics of the 20/20 DynaWatt, but there´s a 33k resistor in the fixed bias circuit... Replace that with a 15k resistor and a weber WP503L 50k bias pot in series  :thumb-up:

Dante

Quote from: Systematic Chaos on March 19, 2016, 01:35:51 AM
Quote from: rnolan on March 18, 2016, 05:26:04 AM
Hey SC, just wanted to say I really appreciate you finding all this stuff for us all  :thumb-up:

All cool bros!
I did some mods and maintenance on some Boogies ;)

I can't thank you enough for the advice on re-tubing my DC-5 combo  :bow: