Other ADA Gear > ADA Effects

NGD

(1/3) > >>

Harley Hexxe:
I got both of the Delay units I bought off Evil-bay today...

   The Digitizer 4 very well packaged and working like a champ with the DS 4 foot switch, and a cable. Great purchase for $99.00
 :crazy:

   The 2.56i on the other hand wasn't packaged as well, and won't power up. I tried another fuse in it and still no life, bummer!

    I contacted the seller and he says to send it back and he'll refund my purchase. I'd rather keep it if I can get it going again.
    I'm pretty sure rough handling during shipping is the reason it's not working, any suggestions if there might be something I can look at and see if I can get it working?
    You don't see too many of these delays around.

   Harley 8)

MarshallJMP:
Start with measuring the voltages over the 3 big caps.

Harley Hexxe:
Okay,

   I opened it up and found a plug into the board had come loose. I connected it, and WHAM! we have power!!! :whoohoo!:

    So it's a good day after all
  :ada-big:

Kim:

--- Quote from: Harley Hexxe on May 23, 2017, 03:13:23 PM ---Okay,

   I opened it up and found a plug into the board had come loose. I connected it, and WHAM! we have power!!! :whoohoo!:

    So it's a good day after all
  :ada-big:
--- End quote ---

Aha!  Beat me to it.   I was gonna say "open it up and have a look-see; maybe something obvious and easy to figure out!" 
Good score mi amigo.  :thumb-up:

rnolan:
Go Harley, excellent  :whoohoo!: :thumb-up:

Navigation

[0] Message Index

[#] Next page