ADA Depot - A Forum To Support Users of ADA Amplification Gear

ADA Preamps => MP-2 => Topic started by: rnolan on February 27, 2015, 07:54:38 AM

Title: Noise - Replace Resitor 913
Post by: rnolan on February 27, 2015, 07:54:38 AM
SC sent this link to me https://m.youtube.com/watch?v=GB-x0xZA0DU (https://m.youtube.com/watch?v=GB-x0xZA0DU), it's exactly the noise I get in my most recent MP2 purchase (but only an issue with really high gain sounds that need the noise gate) and is different resistor than the noise gate chatter fix which is (R611 and change 10Megohm to 3Megohm) 1/2w or better 1w.
So need also to replace R913 as well with 240Kohms 1/2w resistor. I think this was from the original ADA depot ?
Sounds worth doing in all my MP2s (as well as the standard noise mod). And should fix my most recent MP2 (I'll get it done and post)
Title: Re: Noise - Replace Resitor 913
Post by: Systematic Chaos on February 27, 2015, 09:30:03 AM
Metal Film or Metal Oxide (my preference), 0.5w or above....and you're good to go  :thumb-up:
Title: Re: Noise - Replace Resitor 913
Post by: rnolan on February 27, 2015, 10:16:53 AM
A must have  :thumb-up: need to get onto it (times 3 lol), good clip SC  :thumb-up: and thanks to the guy in it BTW  :wave: