Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[mjonesjr8]

Manual Says to flip it up if not running to an amp which I'm not just to an interface and out to monitors?  I do not see a switch to flip.
Does the MPC go into the midi out/in or thru

Thanks guys sorry for having so many questions.

[rnolan]

Hey no worries, we like questions  and we like to help.
The early MP1s had a slide switch on the top (kind of in the centre) to change the A/B outputs from instrument level (> guitar amp input) to line level (everything else, poweramp, PC interface (depending on interface)) (so inst lv = millivolts, line lv = volts). These units also have it written on the back plate (which may have faded a bit ?).
If you don't have the switch, then you have a later (and younger) version MP1 and you should refer to the later manual, another mod was the back input initially was line level, then they changed to inst level.

[mjonesjr8]

Okay great info thanks

[MarshallJMP]

The MPC goes to the midi in jack.

[rnolan]

Thanks MJMP, missed that one  and there's a socket on the back near the midi in for the power supply for the MPC so you can use a/the 7 pin midi lead to remote power it. And unless you are doing complicated midi patch set the midi channel on the MP1 to "ALL"