ADA Depot - A Forum To Support Users of ADA Amplification Gear

Let's Get Technical => Schematics & Modifications (mods) => Topic started by: Dante on December 29, 2013, 09:16:49 AM

Title: The Vault = Schematics and Mods
Post by: Dante on December 29, 2013, 09:16:49 AM
Okay folks, here's a list of links to get you all the Schematics and Modifications that I have found (so far). If you have more, please PM me & I'll be glad to add them to this listing.

Modifications
MP-1 Level Switch Mod (http://adadepot.com/mods/ADA_MP-1_Level_Switch_Mod.pdf)
MP-1 Noise Mod (http://adadepot.com/mods/ADA_MP-1_Noise-Mod_Doc.pdf)
MP-1 Noise Mod v2 Kit (http://adadepot.com/mods/Noise_mod_V2_kit.pdf)
MP-1 Stock Gain Mod (http://adadepot.com/mods/ADA_MP-1_Stock_Gain_Mod_Doc.pdf)
MP-1 (v1) Input Jack Conversion Mod (http://adadepot.com/mods/ADA_MP-1_v1.xx_Rear_Input_Jack_Conversion_Mod.pdf) This file ref will be deleted, New (from MJMP), see attachment
MP-1 Mod1 Last Tube Gain Stage Mod (http://adadepot.com/mods/MOD_1__Last_tube_gain_stage/mod1.pdf)
MP-1 Mod 2 Marshall (http://adadepot.com/mods/MOD_2__Marshall_/Mod2-Marshall.jpeg)
MP-1 Mod 3 (http://adadepot.com/mods/mod3.pdf)
MP-1 Mod 3.666 (http://adadepot.com/mods/ADA_MP-1_MOD3.666_Hi-Res.pdf)
MP-1 Mod 4 Mark II Mod (http://adadepot.com/mods/ADA_MP-1_MOD4_Mark_II.pdf)
MP-1 Rear Input Jack Mod REV A Raw Pics.zip (http://adadepot.com/mods/MP1-RearInputJackModRevARawPics.zip)
MP-2 Noise Mod (http://adadepot.com/mods/MP-2-NoiseMod.pdf)

MP-1 Schematics
MP-1 EQ section (http://adadepot.com/mods/ada_mp1a/ADAMP1eq.jpg)
MP-1 Preamp section (http://adadepot.com/mods/ada_mp1a/ADAMP1pre.jpg)
MP-1 Tube Board section (http://adadepot.com/mods/ada_mp1a/ADAMP1tub.jpg)
MP-1 Jacks (http://adadepot.com/mods/ada_mp1b/ADAMP1jck.jpg)
MP-1 LED Clip Indicators (http://adadepot.com/mods/ada_mp1b/ADAMP1led.jpg)
MP-1 Power Supply (http://adadepot.com/mods/ada_mp1b/ADAMP1pwr.jpg)
MP-1 Stock Tube Board Component Layout (http://adadepot.com/mods/ADA_MP-1_Stock_Tube-Board_Component_Layout.pdf)
MP-1 Stock Tube Board Bridgewire Layout (http://adadepot.com/mods/ADA_MP-1_Stock_Tubeboard_Bridgewire_Layout.pdf)
MP-1 Midi-To-PCB Schematic (http://adadepot.com/mods/ADA-MP1-midi-io-pcb-680076-digital-schematic.pdf)

MP-1 Classic Manual
MP-1 Classic Manual (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP1-Classic-manual-version-1.pdf)
MP-1 Classic Specsheet (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP1-Classic-specsheet.pdf)
MP-1 Classic Preset Chart (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP-1-Classic-V100-preset-chart.pdf)
Setting Up Patches on the MP-1 Classic (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/setting-up-patches-on-the-ADA-MP1-Classic.pdf)

MP-1 Classic Schematics
MP-1 Classic Chorus (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP-1-Classic-chorus.pdf)
MP-1 Classic EQ (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP-1-Classic-eq.pdf)
MP-1 Classic Input Stage Compressor (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP-1-Classic-input-stage-compressor.pdf)
MP-1 Classic Output Drivers & Pot Board (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP-1-Classic-output-drivers_pot-bd.pdf)
MP-1 Classic Power Supply & Peak Meters (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP-1-Classic-power-supply_peak-meters.pdf)
MP-1 Classic Processor (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP-1-Classic-processor.pdf)
MP-1 Classic Tubes (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP-1-Classic-tubes.pdf)

MP-1 Classic Assembly
MP-1 Classic Chassis Assembly (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP-1-Classic-chassis-assembly.pdf)
MP-1 Classic Interconnect Drawing (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP-1-Classic-interconnect-drawing.pdf)
MP-1 Classic PCB Assembly (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP-1-Classic-PCB-assembly.pdf)
MP-1 Classic PCBD Assembly (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP-1-Classic-PCBD-assembly.pdf)
MP-1 Classic Additional Info on Stuffing Charts (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP1-Classic-additional-info-on-stuffing-charts.pdf)
MP-1 Classic PCB Approval (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP1-Classic-PCB-approval.pdf)
MP-1 Classic PCB Revision 1 (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP1-Classic-PCB-revision-1.pdf)
MP-1 Classic PCB Revision 2 (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP1-Classic-PCB-revision-2.pdf)
MP-1 Classic PCB Revision 3 (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP1-Classic-PCB-revision-3.pdf)
MP-1 Classic Sound Check Procedure (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP1-Classic-sound-check-procedure.pdf)

MP-2 Schematics
MP-2 Tube Stages & Master Volume (http://adadepot.com/mods/ADA-MP2-tubes-stages_master-volume.pdf)
MP-2 Passive & Graphic EQs (http://adadepot.com/mods/ADA-MP2-passive-and-graphic-equalizers.pdf)
MP-2 Output Mixer / Speaker Sims / Output Driver Stage Controls (http://adadepot.com/mods/ADA-MP2-output-mixer_speaker-simulator_output-drivers_stage-controls.pdf)
MP-2 Microprocessor & Interface Circuits (http://adadepot.com/mods/ADA-MP2-microprocessor_interface-circuits.pdf)
MP-2 Loading Chart (http://adadepot.com/mods/ADA-MP2-loading-chart.pdf)
MP-2 LED Meter and Power Supply (http://adadepot.com/mods/ADA-MP2-led-meter-and-power-supply.pdf)
MP-2 Input Stage / Compressor / Wah Filter (http://adadepot.com/mods/ADA-MP2-input-stage_compressor_wah-filter.pdf)
MP-2 Eprom Update Instructions (http://adadepot.com/mods/ADA-MP2-Eprom-update-instruction.pdf)
MP-2 Eliminating Noise Gate Chatter (http://adadepot.com/mods/ADA-MP2-Eliminating-noise-gate-chatter.pdf)
MP-2 Chorus / FX Loop / Noise Gate (http://adadepot.com/mods/ADA-MP2-chorus_effects-loop_noise-gate.pdf)
MP-2 220V Transformer Wiring Assembly (http://adadepot.com/mods/ADA-MP2-220V-transformer-wiring-assembly.pdf)
MP-2 Factory Preset Settings (Eprom 1.41) (http://adadepot.com/mods/MP2_Factory_Presets_1.41.pdf)
MP-2 Twisted Wire Cable List (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-twisted-wire-cable-list.pdf)
MP-2 Transformer Secondary Wiring Assembly (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-transformer-secondary-wiring-assembly.pdf)
MP-2 Taping Chart (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-taping-chart.pdf)
MP-2 Soundcheck Procedures (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-soundcheck-procedures.pdf)
MP-2 Shielded Cable List (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-shielded-cable-list.pdf)
MP-2 Primary Transformer Wiring Assembly 230VAC (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-primary-transformer-wiring-assembly-230VAC.pdf)
MP-2 Primary Transformer Assembly 100VAC (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-primary-transformer-wiring-assembly-100VAC.pdf)
MP-2 Post Dip Touch Up (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-post-dip-touch-up.pdf)
MP-2 PCB Assembly Special Components Mounting Details (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-PCB-assembly-special-components-mounting-details.pdf)
MP-2 PCB Assembly LED Mounting Details (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-PCB-assembly-led-mounting-details.pdf)
MP-2 PCB Assembly Header Mounting Details (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-PCB-assembly-header-mounting-details.pdf)
MP-2 Hookup Wire List (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-hookup-wire-list.pdf)
MP-2 Heatsink Assembly (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-heatsink-assembly.pdf)
MP-2 Front Panel Sub Assembly (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-front-panel-sub-assembly.pdf)
MP-2 Final Chassis Assembly (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-final-chassis-assembly.pdf)
MP-2 Final Chassis Assembly 2 (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-final-chassis-assembly-2.pdf)
MP-2 EI 112 XMFR Mounting Bracket Assembly (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-EI-112-xmfr-mounting-bracket-assembly.pdf)
MP-2 Burn In Procedures (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-burn-in-procedures.pdf)
MP-2 Assembly Special Components Mounting Details (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-assembly-special-components-mounting-details.pdf)
MP-2 Assembly and Fabrication Drawing List (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-assembly-and-fabrication-drawing-list.pdf)
MP-2 117VAC XFMR Secondary Wiring Assembly Detail (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-117-vac-xfmr-secondary-wiring-assembly-detail.pdf)
MP-2 117VAC XFMR Primary Wiring Assembly Detail (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-117-vac-xfmr-primary-wiring-assembly-detail.pdf)
100 & 230VAC XFMR Secondary Wiring Assembly Detail (http://adadepot.com/mods/ADA-MP2-Schematics/ADA-MP-2-100&230-vac-xfmr-secondary-wiring-assembly-detail.pdf)

B200s Schematics
ADA-B200S-Etronics-transformer-info.pdf (http://adadepot.com/mods/ADA-B200S-schematics/ADA-B200S-Etronics-transformer-info.pdf)
ADA-B200S-PCB-fabrication-680080-rev-A.pdf (http://adadepot.com/mods/ADA-B200S-schematics/ADA-B200S-PCB-fabrication-680080-rev-A.pdf)
ADA-B200S-PCB-fabrication-routing.pdf (http://adadepot.com/mods/ADA-B200S-schematics/ADA-B200S-PCB-fabrication-680080-rev-A.pdf)
ADA-B200S-Test-procedure.pdf (http://adadepot.com/mods/ADA-B200S-schematics/ADA-B200S-Test-procedure.pdf)
ADA-B200S-Woods-transformers-220V-info.pdf (http://adadepot.com/mods/ADA-B200S-schematics/ADA-B200S-Woods-transformers-220V-info.pdf)
ADA-B200S-assembly-updates.pdf (http://adadepot.com/mods/ADA-B200S-schematics/ADA-B200S-assembly-updates.pdf)
ADA-B200S-chassis-2-space-small.pdf (http://adadepot.com/mods/ADA-B200S-schematics/ADA-B200S-chassis-2-space-small.pdf)
ADA-B200S-chassis-heatsink.pdf (http://adadepot.com/mods/ADA-B200S-schematics/ADA-B200S-chassis-heatsink.pdf)
ADA-B200S-loading-chart.pdf (http://adadepot.com/mods/ADA-B200S-schematics/ADA-B200S-loading-chart.pdf)
ADA-B200S-schematics-one-channel-plus-PS.pdf (http://adadepot.com/mods/ADA-B200S-schematics/ADA-B200S-schematics-one-channel-plus-PS.pdf)
ADA-B200S-transformer-220V-50hz.pdf (http://adadepot.com/mods/ADA-B200S-schematics/ADA-B200S-transformer-220V-50hz.pdf)
ADA-B200S-transformer-handdrawing.pdf (http://adadepot.com/mods/ADA-B200S-schematics/ADA-B200S-transformer-handdrawing.pdf)
ADA-B200S-transformer-japan-domestic-2.pdf (http://adadepot.com/mods/ADA-B200S-schematics/ADA-B200S-transformer-japan-domestic-2.pdf)
ADA-B200S-transformer-japan-domestic.pdf (http://adadepot.com/mods/ADA-B200S-schematics/ADA-B200S-transformer-japan-domestic.pdf)
ADA-B200S-wire-lenghts.pdf (http://adadepot.com/mods/ADA-B200S-schematics/ADA-B200S-wire-lenghts.pdf)
ADA-B200S-wiring-diagram-220V.pdf (http://adadepot.com/mods/ADA-B200S-schematics/ADA-B200S-wiring-diagram-220V.pdf)

Microtube 200 (MT-200) Schematics
ADA Microtube 200 Audio Board Loading Chart.pdf (http://adadepot.com/mods/mt200/ADA-Microtube-200-audio-board-loading-chart.pdf)
ADA Microtube 200 Burn In Procedure.pdf (http://adadepot.com/mods/mt200/ADA-Microtube-200-burn-in-procedure.pdf)
ADA Microtube 200 Power Supply.pdf (http://adadepot.com/mods/mt200/ADA-Microtube-200-power-supply.pdf)
ADA Microtube 200 Chassis Assembly Drawing.pdf (http://adadepot.com/mods/mt200/ADA-Microtube-200-chassis-assembly-drawing.pdf)
ADA Microtube 200 Primary AC Wiring.pdf (http://adadepot.com/mods/mt200/ADA-Microtube-200-primary-ac-wiring.pdf)
ADA Microtube 200 Audio Channel A.pdf (http://adadepot.com/mods/mt200/ADA-Microtube-200-audio-channel-A.pdf)
ADA Microtube 200 Audio Channel B.pdf (http://adadepot.com/mods/mt200/ADA-Microtube-200-audio-channel-B.pdf)
ADA Microtube 200 Pots & Jacks Board.pdf (http://adadepot.com/mods/mt200/ADA-Microtube-200-pots_jacks-board.pdf)
ADA Microtube 200 Pots & Jacks Board Wiring.pdf (http://adadepot.com/mods/mt200/ADA-Microtube-200-pots_jack-board-wiring.pdf)
ADA Microtube 200 Wiring Harness.pdf (http://adadepot.com/mods/mt200/ADA-Microtube-200-wiring-harnesse.pdf)
ADA Microtube 200 Power Supply Unit (PSU) Assembly Drawing.pdf (http://adadepot.com/mods/mt200/ADA-Microtube-200-psu-assembly-drawing.pdf)
ADA Microtube 200 Power Supply Unit (PSU) Loading Chart.pdf (http://adadepot.com/mods/mt200/ADA-Microtube-200-psu-loading-chart.pdf)

Misc. Schematics
ADA T100s Schematics (PDF) (http://adadepot.com/mods/ADA-T100s.PDF)
Title: Re: The Vault = Schematics and Mods
Post by: MarshallJMP on January 14, 2014, 08:30:37 AM
Hey Dante


You got ALOOOOOOT of emails
Title: Re: The Vault = Schematics and Mods - Noise mod for MP2
Post by: W.Laturno on January 14, 2014, 12:14:34 PM
If MarshallJMP has already sent this to ya please just delete it  - It's gotta be the # 1 most important mod for a dying MP-2
sorry for the attachment, I could not figure out how to PM ya with an attahcement....
( refer to attachement )

Regards,
Will.
Title: Re: The Vault = Schematics and Mods - Noise mod for MP2
Post by: tompatheman on January 16, 2014, 11:31:13 AM
If MarshallJMP has already sent this to ya please just delete it  - It's gotta be the # 1 most important mod for a dying MP-2
sorry for the attachment, I could not figure out how to PM ya with an attahcement....
( refer to attachement )

Regards,
Will.

Must I really change all those to get it more quite? My Mp-2 just arrived and it's really noisy
Title: Re: The Vault = Schematics and Mods
Post by: MarshallJMP on January 16, 2014, 02:02:29 PM
Start with replacing R913.
Title: Re: The Vault = Schematics and Mods
Post by: Dante on January 28, 2014, 09:03:53 PM
Hey Dante


You got ALOOOOOOT of emails

Yeah, I did. 35!!  :lol:  I will get those posted in the coming days, weeks, months. No worries.
Title: Re: The Vault = Schematics and Mods - Noise mod for MP2
Post by: Dante on January 28, 2014, 09:27:10 PM
If MarshallJMP has already sent this to ya please just delete it  - It's gotta be the # 1 most important mod for a dying MP-2
sorry for the attachment, I could not figure out how to PM ya with an attahcement....
( refer to attachement )

Regards,
Will.

No Worries Will, it's been added to the list of Mods (for now)

I can see (by MJMP's donations) I'm going to be splitting things up a but as we continue to grow the vault. Which is cool  :thumb-up:
Title: Re: The Vault = Schematics and Mods
Post by: MarshallJMP on January 29, 2014, 02:28:12 PM
I think i mailed it all,let me know should you be missing something.

I also have some original blue prints of the mp-1 case and all other stuff.
Title: Re: The Vault = Schematics and Mods
Post by: prubio on March 16, 2014, 03:59:12 AM
Hi dante

Power supply scheme for MP1 is not available as it is directing to the JacksMP1 scheme.
Can you fix this? I'm trying to replace the transformer, so I wonder the power supply scheme will fit my needs,

MM of thxs for keeping ADA rock the world!
Title: Re: The Vault = Schematics and Mods
Post by: John Mac on April 22, 2014, 11:40:23 PM
Having looked at the schematics of the MP1, MB1 and more closely at the MP2 I recommend that any ADA product user buys the best power filter / surge suppressor they can to avoid unwanted power surges doing nasty things. This needs to feed a powerboard with the connections to the rest of your gear. I have some backyard suggestions if you are located in areas subject to a lot of lightning but the best idea is to unplug everything from the wall when you are not using it.

Not wanting to be the bearer of less than positive news but unfortunately a few of the chips that are in the MP2s do not appear to be manufactured by the original manufacturer and this may make future repairs significantly time consuming whilst alternative replacements are sought. There may be alternatives (like the power mosfet debacle by Toshiba) where chinese manufacturers launched alternatives however some of the chips are quite specialised. Perhaps a second unit may be an alternative.

If anyone in the service industry has details of suitable replacements it might be worthwhile posting these in this section.

If I have motivation in the coming months I may have a look more closely and have a search of alternatives if there are no helpful replies.

Cheers all.

 
Title: Re: The Vault = Schematics and Mods
Post by: rnolan on April 23, 2014, 05:43:27 AM
Hey John, this post (http://adadepot.com/index.php?topic=311.15) if you haven't seen it is quite interesting, replacing all the opp amps.

I've found my MP2 and to some extent my old MP1 are not fond of generators, they go space monkeys in the middle of a solo etc and the only fix is boot them.  I now use an UPS (1 kva uniteruptable power supply) which isolates me somewhat (go with a de-coupled UPS).  I went the ups way because they are cheaper (albeit heavier) than a decent power conditioner, down side is the battery goes off over time, upside, they are probably as good if not better than most power conditioners and heaps cheaper (I paid ~$160 AUD) (shit loads around as everyone has to have one now for their home office....)
Title: Re: The Vault = Schematics and Mods
Post by: MarshallJMP on April 23, 2014, 01:52:49 PM
I have a good supply of all the obsolete chips in the mp-2,so no worries :lol:
Title: Re: The Vault = Schematics and Mods
Post by: John Mac on April 26, 2014, 02:40:54 AM
Good work MJ

I also discovered some of the aircraft parts suppliers still have stock of the electronically controlled resistors as well


As far as UPS goes, i work for a large health organisation that has about 1000 sites and a coverage area of 1/3 continental united states and the one thing we learned quickly is that most smaller ups need a surge suppressor on the input. We use 3KvA filters that are a bit large for this application but unless you are using a $500.00 1KvA ups it is just as susceptible to risk
(On the neat side is once we started putting filters and ups in surge susceptible areas that we uncovered all sorts of other hardware issues hidden by crapy power. )
Title: Re: The Vault = Schematics and Mods
Post by: Satch on June 14, 2014, 06:39:32 AM
Dante, great job with this section!!!!!!!!!!!!!!!!! Appreciate the time and effort.
Title: Re: The Vault = Schematics and Mods
Post by: Dante on June 14, 2014, 09:40:15 AM
Thanks buddy, glad you like it. I hope it is a valuable resource for folks seeking out this info  :thumb-up:
Title: Re: The Vault = Schematics and Mods
Post by: Darth Infernus on July 17, 2014, 12:08:33 AM
It seems there's no mention of the 3TM in the mods page. Why is that?
Title: Re: The Vault = Schematics and Mods
Post by: Darth Infernus on July 29, 2014, 12:33:29 AM
Really, no reply??
Title: Re: The Vault = Schematics and Mods
Post by: rnolan on July 29, 2014, 07:17:10 AM
Sorry didn't see your post...  For now most of the 3TM mod stuff is in the MP1 section IIRC, but there's bits all around depending on what's being chatted about (lots of posts though).  The schematics mods section is developing, we have what we have so far, and happy to add more, and happy to add a 3TM section (although MJMP would be better suited to do that).
Title: Re: The Vault = Schematics and Mods
Post by: Darth Infernus on August 06, 2014, 10:49:39 PM
rnolan:

Thank you for the heads up!
Title: Re: The Vault = Schematics and Mods
Post by: rnolan on August 07, 2014, 04:47:44 AM
No worries  :thumb-up:
Title: Re: The Vault = Schematics and Mods
Post by: RobbHell on August 08, 2014, 10:46:45 AM
Yes a description and a photo of the board would be nice.
But if anyone of has ever bought your Board from Hairston or Marshall you will clearly read " THIS DOCUMENTATION IS NOT FOR INTERNET REPOST NOR IS THE SCHEMATICS"   
Title: Re: The Vault = Schematics and Mods
Post by: RobbHell on September 10, 2014, 04:04:47 PM
Input jack conversion V2
Title: Re: The Vault = Schematics and Mods
Post by: RobbHell on September 10, 2014, 04:11:38 PM
More
Title: Re: The Vault = Schematics and Mods
Post by: RobbHell on September 10, 2014, 04:14:09 PM
More
Title: Re: The Vault = Schematics and Mods
Post by: Darth Infernus on September 17, 2014, 12:47:57 AM
So what does one need to do to get/purchase the 3TM?
Title: Re: The Vault = Schematics and Mods
Post by: Systematic Chaos on September 17, 2014, 01:17:44 AM
MP-1 3TM (http://www.marshalljmpmodshop.net/ada%20mp1%203tm.htm)
Title: Re: The Vault = Schematics and Mods
Post by: MarshallJMP on September 17, 2014, 01:21:56 PM
So what does one need to do to get/purchase the 3TM?

PM or email me and i'll hook you up with one.
Title: Re: The Vault = Schematics and Mods
Post by: Dante on September 27, 2014, 01:40:15 PM
 :banana-trip: :banana-trip: :banana-trip: :banana-trip: :banana-trip:
WHooo HOOO!

Diggin through some old boxes, I found an old CD containing all the Microtube 200 schematics!!!! I have added them to the main listing of the vault (http://adadepot.com/index.php?topic=148.msg580#msg580) accordingly.
Title: Re: The Vault = Schematics and Mods
Post by: El Chiguete on September 28, 2014, 09:58:16 AM
Dante you should make a thread like this with the PDFs of the manuals too.
Title: Re: The Vault = Schematics and Mods
Post by: Dante on September 29, 2014, 08:54:20 PM
Dante you should make a thread like this with the PDFs of the manuals too.

You sir, are a GENIUS

Consider it done because it is (http://adadepot.com/index.php?topic=659.msg5356#msg5356)
Title: Re: The Vault = Schematics and Mods
Post by: El Chiguete on October 02, 2014, 02:46:21 PM

You sir, are a GENIUS

Consider it done because it is (http://adadepot.com/index.php?topic=659.msg5356#msg5356)

WOW that was fast!... and now I know I'm a genius! jejeje
Title: Re: The Vault = Schematics and Mods
Post by: rnolan on October 03, 2014, 04:36:14 AM
Go Dante  :thumb-up: , and I made it sticky and locked so it doesn't get surrounded with posts like the mod and schematics, Dante we need to fix that but I can't work out how to move an individual post, topics sure but not a post within a topic
Title: Re: The Vault = Schematics and Mods
Post by: trader144 on November 26, 2014, 11:50:31 AM
Is there a mod that expands or adjusts the EQ?
Title: Re: The Vault = Schematics and Mods
Post by: MarshallJMP on November 26, 2014, 03:09:52 PM
Take a look at the mod3.666 there is a section on modifying the EQ.
Title: Re: The Vault = Schematics and Mods
Post by: trader144 on December 14, 2014, 09:38:41 PM
What does the acronym HDRM on the preamp schematic mean?
I have searched the net but cannot find it.
Title: Re: The Vault = Schematics and Mods
Post by: trader144 on December 16, 2014, 06:27:03 PM
More schematics and testing
Title: Re: The Vault = Schematics and Mods
Post by: trader144 on December 16, 2014, 06:27:50 PM
More schematics and testing
Title: Re: The Vault = Schematics and Mods
Post by: trader144 on December 16, 2014, 06:28:38 PM
More schematics and testing
Title: Re: The Vault = Schematics and Mods
Post by: trader144 on December 16, 2014, 06:33:38 PM
More schematics and testing
Title: Re: The Vault = Schematics and Mods
Post by: trader144 on December 16, 2014, 06:34:40 PM
More schematics and testing
Title: Re: The Vault = Schematics and Mods
Post by: trader144 on December 19, 2014, 06:41:57 AM
What does the acronym HDRM on the preamp schematic mean?
I have searched the net but cannot find it.


Looks like it either stands for High Data Rate Multiplexer (a digital data splitter) or Hold Down and Release Mechanism. My guess is it is the latter and it is referring to a connection to the front panel membrane.
Title: Re: The Vault = Schematics and Mods
Post by: Sparker on December 19, 2014, 10:29:21 PM
HDRMs are the signal monitor points that go the clip LEDs on the front panel. Probably short for Headroom.   :thumb-up:
Title: Re: The Vault = Schematics and Mods
Post by: trader144 on December 20, 2014, 06:38:52 AM
Thanks !
Title: Re: The Vault = Schematics and Mods
Post by: Dante on February 24, 2015, 11:47:59 AM
FYI: I added a bunch of MP-1 Classic schematics yesterday (thank you Sparker!!)
Title: Re: The Vault = Schematics and Mods
Post by: rnolan on February 26, 2015, 01:04:29 AM
Go Dante  :thumb-up:
Title: Re: The Vault = Schematics and Mods
Post by: Peter H. Boer on June 20, 2015, 07:50:14 AM
MB-1 schematics  :thumb-up:
Title: Re: The Vault = Schematics and Mods
Post by: Peter H. Boer on June 20, 2015, 07:51:49 AM
and more MB-1
Title: Re: The Vault = Schematics and Mods
Post by: Peter H. Boer on June 20, 2015, 07:53:56 AM
Still more MB-1
Title: Re: The Vault = Schematics and Mods
Post by: MarshallJMP on June 20, 2015, 07:58:21 AM
Or here it is in one pdf file.Let's hope now that Robbhell won't bitchslap me anymore. :'(
Title: Re: The Vault = Schematics and Mods
Post by: Rusty on September 26, 2015, 03:25:34 PM
Hi folks, where can I find the schematic diagram for the Mp1 V1 and V2 main board. I have looked at the PCB layouts that are here but I would like to have the actual MP1 schematic as I would like to study it to see whats connected to what. It would be really nice to see it if that would be possible.

I'm sorry folks, but is the schematic here somewhere on the forum that I have mistakenly overlooked and not looked hard enough for or maybe I'm getting old   :)

Thanks in advance folks.

 
Title: Re: The Vault = Schematics and Mods
Post by: rnolan on September 27, 2015, 06:04:58 AM
Hey Rusty, the MP1 schematics are here (http://adadepot.com/index.php?topic=148.45). What we don't have is a nice diagram of the signal flow through the MP1 like on page 3 of the MP2 manual which is very useful from a gain structure patching sense (better/more useful for what connects to what). I did ask MJMP if he'd do one for us (as he knows the MP1 backwards/forwards and sideways LoL) quite a while ago. Hopefully this post my jog him to do it ? (please  :bow: ).
Title: Re: The Vault = Schematics and Mods
Post by: Rusty on September 27, 2015, 01:55:07 PM
Hey Rusty, the MP1 schematics are here (http://adadepot.com/index.php?topic=148.45). What we don't have is a nice diagram of the signal flow through the MP1 like on page 3 of the MP2 manual which is very useful from a gain structure patching sense (better/more useful for what connects to what). I did ask MJMP if he'd do one for us (as he knows the MP1 backwards/forwards and sideways LoL) quite a while ago. Hopefully this post my jog him to do it ? (please  :bow: ).

Ahhh,,, I think I need new glasses. Thats what I was looking to see. I will take a good look at both the MP1 & MP2 schematics. If MJMP could do something like that I think it would be an awsome schematic to have and the man would deserve a gold medal and the Nobel peace prize together.

I do know that it would be quite an undertaking to start from scratch laying out the schematic on a electronic software package, plus given that the MP1 has the track on both sides of the board it would make it double the chore.
I use a couple of electronic design software packages for my own little projects. I used LTspice for several simulation models and I think that it's an excellent powerful little piece of software thats free to download. Another package that I use from time to time is National Instruments Multisim and Ultiboard. I was educated on that one and I use it seldomly to test out my little circuits.

I could 'possibly' give MJMP a hand to lay out the schematic depending on which software package he uses, some of the spice variants are compatible with one another I think. But if he knows that board inside/outside/upside down then he's light years ahead.

Thanks for that rnolan, much, much appreciated.

   
Title: Re: The Vault = Schematics and Mods
Post by: MarshallJMP on September 28, 2015, 09:59:03 AM
Why would you like to redraw the schematic?
Title: Re: The Vault = Schematics and Mods
Post by: Rusty on September 28, 2015, 01:46:28 PM
Why would you like to redraw the schematic?
Hey Rusty, the MP1 schematics are here (http://adadepot.com/index.php?topic=148.45). What we don't have is a nice diagram of the signal flow through the MP1 like on page 3 of the MP2 manual which is very useful from a gain structure patching sense (better/more useful for what connects to what). I did ask MJMP if he'd do one for us (as he knows the MP1 backwards/forwards and sideways LoL) quite a while ago. Hopefully this post my jog him to do it ? (please  :bow: ).

I was thinking something along the line that rnolan suggested and was thinking to make a more compact consice signal flow diagram of the audio signal path only leaving out the digital control blocks. Your right though, its all there after having a proper look through the scematic that you kindly posted up.
I probably got too far ahead of myself with that post as I didn't get a decent look at that scematic.  ::)
Title: Re: The Vault = Schematics and Mods
Post by: MarshallJMP on September 28, 2015, 01:49:02 PM
The schematic is quite good,try to compare that with the MB-1 schematic,now that's a mess.
Title: Re: The Vault = Schematics and Mods
Post by: rnolan on October 01, 2015, 07:12:51 AM
Maybe have a look at page 2 of the MP2 User Manual "Signal Flow" diagram. This is what I was suggesting would be useful for MP1/Classic/3TM etc. This diagram is very useful for patching, gain structure etc, it's not a "under the hood" diagram as such, but desalinates where you can come and go. E.g. when I thought to use the MP2 cab sims with an MP1, you can clearly see that by coming in the MP2 FX returns (ie MP1 A/B out > MP2 FX rtns A/B), and after that you pick up (in the MP2, If you wanted ?) Tremolo, Stereo Volume CC, Room eq (this is very useful BTW), Output level and then cab sims (I recommend the 2 x 12 setting)). Reading this page helped/set me to test this scenario. Which worked a treat  :thumb-up:
@MJMP, so not really a schematic, just a signal flow diagram of MP1/classic/3TM? (not sure 3TM would differ from MP1 in this context) and MB1 would be really useful.
Title: Re: The Vault = Schematics and Mods
Post by: NeverAfter on April 21, 2016, 01:48:00 AM
Digging through some old files on my server, I've found some more schematics and instructions for the MP-2 that aren't listed here. Enjoy!
Title: Re: The Vault = Schematics and Mods
Post by: NeverAfter on April 21, 2016, 01:49:18 AM
...more
Title: Re: The Vault = Schematics and Mods
Post by: NeverAfter on April 21, 2016, 01:50:24 AM
...and some more
Title: Re: The Vault = Schematics and Mods
Post by: NeverAfter on April 21, 2016, 01:51:29 AM
...and even more
Title: Re: The Vault = Schematics and Mods
Post by: NeverAfter on April 21, 2016, 01:52:35 AM
...you guessed it, more!
Title: Re: The Vault = Schematics and Mods
Post by: NeverAfter on April 21, 2016, 01:53:21 AM
...and the last few  ;D
Title: Re: The Vault = Schematics and Mods
Post by: rnolan on April 21, 2016, 02:42:57 AM
Cool  :thumb-up: and many thanks  :wave: . Need to get Dante to copy them to the link area...
Title: Re: The Vault = Schematics and Mods
Post by: Dante on April 21, 2016, 10:43:16 AM
Thanks a lot...more work for me :hair-out:
Title: Re: The Vault = Schematics and Mods
Post by: NeverAfter on April 21, 2016, 04:11:20 PM
LOL, you're welcome.   >:D
Title: Re: The Vault = Schematics and Mods
Post by: Dante on April 30, 2016, 09:37:27 AM
DONE. You'll notice a much longer list of schematics for the MP-2 in the Vault (http://adadepot.com/index.php?topic=148.0) now

I also found some schematics for the MXC controller, I'll get those in here too
Title: Re: The Vault = Schematics and Mods
Post by: Kim on July 30, 2016, 11:22:06 AM
I was looking through some old stuff and found some pics with notes about MOD3.1 

Remember that the MOD3 needs to be done first before applying this revision.
Title: Re: The Vault = Schematics and Mods
Post by: rnolan on July 30, 2016, 11:40:00 AM
Cool, thanks Kim  :thumb-up:
Title: Re: The Vault = Schematics and Mods
Post by: DannyjoeCarter on January 18, 2017, 03:03:23 AM
WOW found everything I need right here!!

 So a quick question those in the know - to do "just" the mid scoop mod on the MOD3.666 basically I could just change out R151 with the new value couldn't I?

I'm loving the fact that it says you could go from -12 to around -30!!  :headbanger:
I'd be happy with around -14 or -16  ;D
Title: Re: The Vault = Schematics and Mods
Post by: Iperfungus on January 18, 2017, 04:54:53 AM
WOW found everything I need right here!!

 So a quick question those in the know - to do "just" the mid scoop mod on the MOD3.666 basically I could just change out R151 with the new value couldn't I?

I'm loving the fact that it says you could go from -12 to around -30!!  :headbanger:
I'd be happy with around -14 or -16  ;D

Too much mid-scoop will kill you, Dan!  :amaze: :amaze: :amaze:
Title: Re: The Vault = Schematics and Mods
Post by: DannyjoeCarter on January 18, 2017, 04:38:29 PM
WOW found everything I need right here!!

 So a quick question those in the know - to do "just" the mid scoop mod on the MOD3.666 basically I could just change out R151 with the new value couldn't I?

I'm loving the fact that it says you could go from -12 to around -30!!  :headbanger:
I'd be happy with around -14 or -16  ;D



Too much mid-scoop will kill you, Dan!  :amaze: :amaze: :amaze:

Yeah for sure  ;D I just need a little less than what is available to drop now.
 I'm gonna do this mod, just need to see where exactly this set of components are on my board for the mid EQ section.  :D
Title: Re: The Vault = Schematics and Mods
Post by: Moshefier75 on July 04, 2018, 07:40:24 AM
Where is the battery clip mod?
Title: Re: The Vault = Schematics and Mods
Post by: rnolan on July 05, 2018, 02:16:20 AM
This is for the MP1, the MP2 battery is vertical.  Also this will erase all patches, so you'll have to reload the factory presets into RAM (from the EPROM) and reprogram any other patches.
Title: Re: The Vault = Schematics and Mods
Post by: zeppelin on February 22, 2019, 08:27:14 PM
Hey guys sorry for posting this.
Is there a Mod for the MP1 effects loop section?
I thought I saw it last time in the Old forum last time.
Title: Re: The Vault = Schematics and Mods
Post by: rnolan on February 22, 2019, 10:23:57 PM
Is this what you are after ?
Title: Re: The Vault = Schematics and Mods
Post by: leninvargas on May 07, 2023, 10:32:13 AM
Hi Dante, the link for ADA-MP-1-Classic-PCBD-assembly is broken. Just letting you know so you can check it out, and I take this opportunity to greet you again.
Title: Re: The Vault = Schematics and Mods
Post by: Dante on May 07, 2023, 10:40:37 AM
My apologies!

Thanks for finding that, the link is fixed HERE's a COPY FOR YOU (http://adadepot.com/mods/ADA-MP1-Classic-Schematics/ADA-MP-1-Classic-PCBD-assembly.pdf)
Title: Re: The Vault = Schematics and Mods
Post by: DavidMeissner on February 05, 2024, 02:31:43 PM
Does anyone know if schematics are available for DM-2 and DS-4 pedals? Also, does anyone know if the cable is a special cable? I seen to remember my old cables, when I had the 2FX and Digitizer 4, as being stereo cables (TRS), but maybe I am way off on this.

Any help is greatly appreciated.
Title: Re: The Vault = Schematics and Mods
Post by: Harley Hexxe on February 05, 2024, 06:12:08 PM
The cable is a TRS like all the other footswitch controllers.

I found a file for the DM-2, and I'll attach that here.

MJMP might have the schematic for the DS-4, but he's been MIA lately.
Title: Re: The Vault = Schematics and Mods
Post by: rnolan on February 05, 2024, 06:44:30 PM
I have some schematics for 2FX, Digitiser 4, FS2, S1000, TFX4, D1280 & D640.  But not DM-2 and DS-4 unless they also have a different name ?
Title: Re: The Vault = Schematics and Mods
Post by: Dante on February 07, 2024, 10:56:49 AM
I don't have ether one....yet, checked all my stuff

I will add them to the vault if/when i get them tho
Title: Re: The Vault = Schematics and Mods
Post by: Harley Hexxe on February 07, 2024, 12:25:45 PM
Just a suggestion,
  You might want to check the schematics for the machines they control to see if they're included.

   I just attached a link in a reply for the 2FX because MJMP replied to someone else looking for a DM-2 schematic and that was what he attached to his reply.
Title: Re: The Vault = Schematics and Mods
Post by: rnolan on February 08, 2024, 03:39:59 AM
What is/are the DM-2 and DS-4?  If they relate to the schematics I have I'll check if they are included with those. E.g. I have 6 schematics for the 2FX and 7 test bench procedures
Title: Re: The Vault = Schematics and Mods
Post by: Harley Hexxe on February 09, 2024, 05:56:39 AM
The DM-2 is a 4 button foot controller for the 2FX. I have one
The DS-4 is a 4 button foot controller for the Digitizer 4. I have one of those too.