ADA Depot Too - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  


Need a Schematic? Check the Vault *MP-1 Classic Schematics Just Added!!

Pages: [1] 2 3 ... 10
 on: Time Format 
Started by mqqse - Last post by Luke Gibson
I really want a Voodoo Modded JMP-1, I saw Def Leppard last year and Vivian’s tone out front was fantastic. I believe he’s still using the Voodoo Modded JMP-1 with the Axe-FX for effects....  Awesome!!!

I was lucky to find mine for the price I paid.   It’s hard to find with any Voodoo mods now that the service isn’t offered anymore.

Indeed they are.....  Enjoy yours in good health sir!

 on: Time Format 
Started by jimnastic - Last post by MarshallJMP
It seems some pedals can sweep the full range of the pot and some don't, the ADA CCP doesn't seem to do this, so that's why there is a calibration. A Boss FV500 (exp out) has the full range.

 on: Time Format 
Started by parisblue1 - Last post by MarshallJMP
I use the Carlins, but they are not cheap. The cost was as muc as I payed for the pedal  :facepalm:

Carling SPST SW110

 on: Time Format 
Started by rnolan - Last post by rnolan
When you plug in a CCP into the MXC pedal jack the first time you should set the range (;topicseen#msg24798).Also when you use a CCP with the MB-1 (and for CC control the MB-1 needs to have the last/latest EPROM v2.05 (get one here if you haven't got that version, you have to sweep past the current setting for that parameter in the given patch to activate/grab it eg if you are controlling master vol and it's set at 6 in the patch, you need to sweep up to and slightly past 6 on the pedal for it to start to work.
EPROM version is displayed during startup.  When I was doing this I used the global master which just had to be "grabbed" on startup, then it worked across all patches, other patch parameters need to be "grabbed" on a patch by patch basis.

 on: Time Format 
Started by jimnastic - Last post by rnolan
Page 4 of the MXC manual describes the initial set up for the CCP sweep range and soft switch pressure.  It's stored in the MXC.

 on: Time Format 
Started by rnolan - Last post by Peter H. Boer
Any CC pedal would do.
I use(d) Roland EV-5

 on: Time Format 
Started by jimnastic - Last post by jimnastic
Just realised (actually thinking before I type!) a range pot would be potentiometer in series...

 on: Time Format 
Started by parisblue1 - Last post by peoriashows
I agree the red ones look better and are good for home studio use, but I tend to have a hard food on stage and have several non working ones between my 3 ADA pedals. I'm going to do this with my MXC. Does anyone got a part number on those steel buttons or maybe a Mouser catalog number so I can be lazy and not do my research? Ha! I assume Carlin switches are the go-to for this?


Did the same to my MXC pedal but the red ones give a better look  IMO.

 on: Time Format 
Started by rnolan - Last post by peoriashows
I'm late to the party here, but I've been using an MB-1 and an MXC foot controller for many years. Never used the Continuous Control, but always wanted to mess with it and see if I can control volume on stage. I've never been able to track down and ADA CCP pedal. Is there another one that can be used in place of the hard to find ADA pedal?

Hey Peter, I didn't notice the volume steps, it seemed smooth to me but I'll listen for that next time I use it.  It may be because there are 2 ways you can do the master vols.  If you use the "fixed" pallet Edit Pedal allocation (pallet 9), it operates on both tube and SS masters at the same time and also keeps their relative volumes to one another as you sweep.  Moreover, this is only taking up one pallet allocation.  The other way to do it is to assign 2 of the free pallets (eg P1 & P2), one to each master vol and assign the pedal to both pallets.  So this uses 2 pallets and may not keep the relative volumes ? and maybe then goes in the increments you are hearing ??

Hey Harley, do you have to have the parameter on in the patch so it will switch with the quad switch ?  You do with the MB1 chorus (says in the notes) but in MP2 I know I can toggle the tremolo and loop starting from off (I haven't tried chorus).

 on: Time Format 
Started by jimnastic - Last post by jimnastic
ok (ignoring the wonders of the switching and the code) the cheapo Wah volume pedal I ADApted has a 100k pot (which is slightly more than normal midi controller pedals).
Running from the 2 ends of the pedal (which has no adjustment) I get midi 0/1 and midi 127 as seen by the ADA, so it works by stealth :)
I note that if you buy an M-audio pedal (£14) you do have a "range" control similar to how you're describing. I believe this is another pot in parallel, but haven't taken one apart.

If i needed to adjust the range (and did this when I replaced a noisey pot on my Cry Baby wah) the range is a physical adjustment on where the pot gear meets the lever-y thing.
So either way, if you wanted to adjust it is possible, but for a volume or wah, full range for me works.

Pages: [1] 2 3 ... 10