ADA Depot - A Forum To Support Users of ADA Amplification Gear

Let's Get Technical => All PREAMP Tech Tips & Support => Topic started by: WickerMan on April 06, 2014, 04:09:32 PM

Title: Turn pre/power amp into combo
Post by: WickerMan on April 06, 2014, 04:09:32 PM
So I started building my own 2x12 cab and since my mind started wandering and I was thinking that I could turn my second mp-1 into a combo amp.

I know someone on the old depot did something of the kind but my knowledge in electronic is close to nothing, so can't quite figure out how to do it by myself.
Title: Re: Turn pre/power amp into combo
Post by: Batsinthebelltower on April 06, 2014, 09:00:31 PM
Maybe try and extend your cabinet to have a few rack spaces at the top , and then standard mount the pre and poweramp , for an all in one unit  ... 

Some other technical masters on here may have a better suggestion though lol  !
Title: Re: Turn pre/power amp into combo
Post by: rnolan on April 06, 2014, 10:01:24 PM
Bats suggestion is the easiest, if you include say 3 or 4 RU spaces at the top of the box and mount the MP-1, rack effect, 1 or 2 RU poweramp, make sure enough air/ventilation can get to the gear.