ADA Depot - A Forum To Support Users of ADA Amplification Gear
Non ADA Gear => Amps => Topic started by: Chamai on June 26, 2016, 10:54:42 PM
-
hey guys.
sorry for being a newbie at everything.
i am trying to get the chassis out of my jcm 900 mkiii combo.
i removed the 4 screws that's holding the chassis but i can't seem to put it out.
i got a flash light to see the gap and it seems like there is a thin metal plate thats preventing me from sliding the chasis out. are there more screws or parts that needs to be removed?
thanks guys
-
The chassis is only held up by 4 screws and that plate can be troublesome sometimes. In a combo it's stapled on the top of the combo (in head on the bottom) and it's there to prevent noise coming into the amp. Now sometimes this plate come loose or get bend a bit and then it can be a pain in the *** to get the chassis out. So you will need to use your imagination to get it out.
-
yea, its that stupid plate that is preventing the chassis to slide out
gonna get a thin ruler or something to poke around.
thanks for the reply
i was just hoping i wasn't doing anything wrong
-
No you're not doing anything wrong, these things happen sometimes.
-
No you're not doing anything wrong, these things happen sometimes.
thank you sir