ADA Depot - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  

News:

Need a Schematic? Check the Vault *MP-1 Classic Schematics Just Added!!

Pages: [1]   Go Down

Author Topic: Need some interior pictures  (Read 2917 times)

0 Members and 1 Guest are viewing this topic.

assquatch20

  • Newbie
  • *
  • Offline Offline
  • Posts: 16
Need some interior pictures
« on: Time Format »

Hey there, my buddy forgot to take some pictures disassembling my amp and now doesn't remember where the connectors from board to board and such go. If anybody would be willing to post pictures or any assistance with the layout it would be appreciated.
Logged

rnolan

  • Administrator
  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 5998
Re: Need some interior pictures
« Reply #1 on: Time Format »

Hey assquatch20, As you posted this in the T100s section I assume this is the amp you need/want pic for.  Not that many of us have a T100s (they are rare beasts), but MJMP does so he may be able to help you out.  Mean while, have you checked the schematics ? (http://adadepot.com/index.php?topic=372.0)
Logged
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

assquatch20

  • Newbie
  • *
  • Offline Offline
  • Posts: 16
Re: Need some interior pictures
« Reply #2 on: Time Format »

I appreciate the help. I'll try to contact MJMP and see what can be done. I've got schematics and I've given copies to my friend but I'm trying to make it easy on him so it can get done.
Logged

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 4702
    • marshalljmpmodshop.net
Re: Need some interior pictures
« Reply #3 on: Time Format »

From what I could find on the schematics

power supply pcb
K1 ==> power transformer
K2 ==> standby switch
K3 ==> amp pcb K1

amp pcb
K1 ==> K3 power supply pcb
K2 ==> power transformer (filaments)
K3 ==> feedback output transformer 1
K4 ==> output transformer 1
K5 ==> inputs from vol pots
K6 ==> feedback output transformer 2
K7 ==> output transformer 2
Logged

assquatch20

  • Newbie
  • *
  • Offline Offline
  • Posts: 16
Re: Need some interior pictures
« Reply #4 on: Time Format »

That should help for sure. Thanks so much  :thumb-up:
Logged

assquatch20

  • Newbie
  • *
  • Offline Offline
  • Posts: 16
Re: Need some interior pictures
« Reply #5 on: Time Format »

From what I could find on the schematics

power supply pcb
K1 ==> power transformer
K2 ==> standby switch
K3 ==> amp pcb K1

amp pcb
K1 ==> K3 power supply pcb
K2 ==> power transformer (filaments)
K3 ==> feedback output transformer 1
K4 ==> output transformer 1
K5 ==> inputs from vol pots
K6 ==> feedback output transformer 2
K7 ==> output transformer 2

My tech buddy appreciated this very much. It's (mostly) back together but I haven't got to test the thing out yet. A little nervous. He lost some of the mounting screws for the left rack ear so I've got to pull a bunch and figure out what sizes I'm going to need. In trying to do so at his shop I accidentally undid a ground which was pretty annoying to get back on. After that, I slapped the cover back on and decided to come back at it later. On top of that I think a tube retainer popped loose again as it makes a faint rattling when I'm playing through other gear nearby.

I'm unsure if the amp is actually fixed as well... it's been frustrating, to put it nicely.
Logged
Pages: [1]   Go Up