• Welcome to ADA Depot - A Forum To Support Users of ADA Amplification Gear.
 

News:

Lets get Technical > All Things Tube All about preamp and power amp Tubes.

Main Menu

MP-1 "CHORUS".......AWESOME OR ???

Started by RandallRG, February 02, 2014, 10:58:54 AM

Previous topic - Next topic

RandallRG

#15
Hey Dudes how's everyone doing? (what's going on Marshall? Hope all is well Buddy) I am with Marshall...My Rate is usually around 0.1-0.8 & my Depth can be anywhere between 25-100. Depends what all of your other settings are but the way I have some Patches set I have found that having my Depth @ 100 & Rate @ 0.1 it SOUNDS KILLER! Especially with my Morley "Bad Horsie" 2 Wah! I am totally right back in 80's M-E-T-A-L! I still can't believe how long I did w/o a "MP-1"!! I for one think this is One of (If not the BEST!) Pre-Amp out there...P-E-R-I-O-D! :metal:

CiloBlackForce

hey i am with you! when i use clean sounds with chorus , my settings are rate 0.1 , depth 100.

RobbHell

Yes the chorus kicks ass. Whether is clean or distorted it's very cool. Using very low setting on the chorus gives distorted channels a very cool sound.

rnolan

I've mostly used the chorus to get a short fattening delay so set it to rate:0 depth:100 (worked well with MP1), I've noticed lately though using a single ADA split stack which I've wired to be stereo or mono, when I run it in stereo with the MP2 and use rate:0 depth:100, it's flanging quite allot.  I initially thought that the depth was just a short delay, but reading the manual(s), there is other filtering going on even when rate at 0.
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few