• Welcome to ADA Depot - A Forum To Support Users of ADA Amplification Gear.
 

mp1 classic schematics

Started by wolffer0, November 12, 2014, 04:12:03 PM

Previous topic - Next topic

wolffer0

My mp1 classic tubes are not heating up like they should. If I remove one the current is almost enough to make the filiments glow. My voltage is not stable and not enough to get the tubes operating. I traced the power and it originates in the power section being fed by a power transistor with a resistor between them. Then it gets power from somewhere after that. A schematic would help . The mp1 power to the filiments is unregulated 8 volt so different from my setup.

wolffer0

I am hooked on the brown sound that my old jmp1 doesn't have so I need to fix this and they are not to popularge or everyone is keeping theres. $500 on ebay is to much. I ordered the tip31 transistor and the voltage regulators and some new caps for the power section so I can try and fix it in the dark

rnolan

Sounds like an MDRT tranny upgrade may help ? (http://www.marshalljmpmodshop.net/miscellaneous_parts_and_replacement_tubes.htm)
Plenty of schematics here if you look (http://adadepot.com/index.php?topic=148.30), also some good mods for MP1, depending what you want it to do.
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

MarshallJMP

The MDRT doesn't work in the classic.

About your classic,do you get a steady 5V?

RobbHell

All of the MP1 Classic schematics can be downloaded from

www.lydian.ca/ADA_MP1.html

Dante

So, I downloaded all the 'parts' to that multipart archive, but have so far been unsuccessful in extracting the ZIP. Grrrrrrr...

I'll keep scouring the web, it has to be out there somewhere

RobbHell

I feel ya bro.. I got four files to open. Main and Tube board component layouts and some notes. I couldnt get the schematic pdf to open.

Sparker

ADA MP1 Classic - 1. Schematics   :metal:
ADA Gear: MP-1 Tube Board

Sparker

ADA MP1 Classic - 1. Assembly & Test   :metal:
ADA Gear: MP-1 Tube Board

Sparker

ADA MP1 Classic - 1. Manual & Settings   :metal:
ADA Gear: MP-1 Tube Board

Sparker

.. and no, I can't count.   :facepalm:
ADA Gear: MP-1 Tube Board

Dante

YYYyeeeeeaahhh! Go Sparker!!

Thanks buddy, I'll get these in their proper spots in the Vault. Woot!!

RobbHell


RobbHell

Wow what a mess of shit on that Tube Board lol. IC's  everywhere.

Dante

#14
What's an IC?

Integrated Circuitboard? Iced Cucumbers? Ineligible Coupons? Ignorant Concubines? I could keep going...


UPDATE: The Vault has been updated to include all the stuff Sparker sent. Thank You SPARKER!!  :banana-trip: :banana-dance: O0 :metal: :banana-rock: :banana-guitar: :poop: :ada-big: :cheers: