ADA Depot Too - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  

News:

Need a Schematic? Check the Vault *MP-1 Classic Schematics Just Added!!

Pages: [1]   Go Down

Author Topic: Hughes & Kettner Grandmeister Deluxe 40  (Read 31 times)

0 Members and 1 Guest are viewing this topic.

Dante

  • Administrator
  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 1902
  • Nothing more uncommon than common sense
    • The Best Cover Band In Sacramento

I have been drooling over these for a couple years now, the Grandmeister 18, 36, 40 amps. I got my Switchblade combo in hopes that is was a cheap alternative, and it is, but still....those glowing blue heads are so coooool  :metal:

Somebody was selling a Deluxe 40 on Craigslist recently, specifying NO TRADES. So, what do I do? I offer him a trade - haha...I told him "I know you said no trades, but if I don't ask..." and he said "Y'know, I may actually take you up on that" and a trade was born. I gave up a nice US built Peavey EVH Wolfgang Special in exchange for the amp and I think we both did alright in the trade.

Turns out, I know the guy already - he's a local guitarist - friend of a friend (friend of a few of my friends) - and a really nice guy.

This amp is a lot like my Switchblade, but with some more bells & whistles. With the 4 voicings, I find it a pretty adequate replacement for my MP-1 Classic. The Classic also has 4 voices, but two are clean (Solid State and Tube Clean). The Brown channel on the Classic is very close to the Crunch channel on the Grandmeister - you can push it to overdrive really easy and it sounds great. Then, the Grandmeister has two distortion channels, whereas the Classic just has one. So, each has an advantage, each has a trade-off.

The effects in the amp sound pretty good, as good as my multi effects (Boss MS-3) for sure, but I have a lot more options available if I use the multi effects instead of the amp's onboard stuff...let me explain. The stock footswitch comes with buttons for each of the 4 channels, and 3 more buttons to toggle the Boost, Delay, and Modulation FX. So, that's all four channels plus 3 options for each one.

The Boss has 4 buttons, I set each one for a channel in the amp. Then, it has a button that accesses 4 stompbox type effects within. That's one more than the amp. Then, I also have a Boss FS-7 switch that is set to access the Boost and Delay in each patch. Essentially, I have SIX options for each patch. Much better, I can stack a couple delays on a clean tone if I want to, which is nice.

So, here's the first pic of many, I will have a review as soon as I plink around a bit
Logged
ADA Gear: MP-1 Classic | MP-2 | MicroTube 200 | MicroFet | MXC w/Quad Switch
Current Live Rig (wait 10 min., it'll change): Peavey Classic 20mh head into the matching 1x12 speaker cab, using my Boss MS3 via 4CM. Sometimes, I use a Hughes & Kettner Switchblade 50 with the MS3.
Current Rack rig: ADA MP-1 Classic into Boss GX700, running direct in the board. Also have the MP-2 in a 4u rack w/another GX700 and the MicroTube 200 running into two Yamaha 1x12 cabs.

rnolan

  • Administrator
  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 5600
Re: Hughes & Kettner Grandmeister Deluxe 40
« Reply #1 on: Time Format »

Hey Dante, very cool  :thumb-up:
Logged
Studio Rig: MP2/MB1 > Eurorack UB2442FX-Pro > TC M-One XL > Behringer Truths (with Truth Sub) / QUAD ESL 63s
Live Rig: MP2/MB1 > Alesis Quadverb > Alesis Midiverb 4 > Yamaha AM802 > B200s/Carvin TS100/DCM200L > ADA Split Stacks/Mesa P112s

Dante

  • Administrator
  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 1902
  • Nothing more uncommon than common sense
    • The Best Cover Band In Sacramento
Re: Hughes & Kettner Grandmeister Deluxe 40
« Reply #2 on: Time Format »

SEMI-UPDATE: it's only been a couple days

The direct out sound (via the built in H&K Redbox) is not as hot as the live sound out of the speaker. I simply turned on the boost feature in the amp to make it sound much closer to the 'plugged in' version

I have been plugging into my very wide, very deep 1x12 Peavey cab. It sounds really nice, so I am going to find a black one to match this amp (mine is tweed, to match my Peavey Classic 20mh). I think I ended up leaving the Blue Marvel speaker in my Peavey cab after trying a couple others. That cab really projects sound outward in all directions, and Peavey made black ones for their 5150 mini head and the ValveKing mini head...I'll find one to pair with this head and use both of them for my rack rigs too!
Logged
ADA Gear: MP-1 Classic | MP-2 | MicroTube 200 | MicroFet | MXC w/Quad Switch
Current Live Rig (wait 10 min., it'll change): Peavey Classic 20mh head into the matching 1x12 speaker cab, using my Boss MS3 via 4CM. Sometimes, I use a Hughes & Kettner Switchblade 50 with the MS3.
Current Rack rig: ADA MP-1 Classic into Boss GX700, running direct in the board. Also have the MP-2 in a 4u rack w/another GX700 and the MicroTube 200 running into two Yamaha 1x12 cabs.
Pages: [1]   Go Up