They will be here...stay tooned
Aaaannnnddd.....here's a clean patch written for my Epiphone Flying Vee with a Seymour Duncan SH-1 in the bridge and a GFS Classic II Alnico 2 in the neck
Voicing: #2 Spanky Clean
Drive: 60 Master: 65
Low: 2
Mid: 0
Hi: 2
Pres: 2
Compressor: In Ratio: 1.5/1 Threshold: 74 Gain: 1
EQ
100 = 4
170 = 2
280 = 2
470 = 0
800 = 0
1.3 = 0
2.2 = 0
3.8 = 4
6.3 = 4
WAH: Out / Pedal
Tremolo: Out/Surf
Noise Reduction: out/ fader / 50
Chorus: Out / 50 / 0.3
F/X Loop: In
A = 62%
B = 78%
That's the clean patch, and it's being subtly affected by the Quadraverb - just some reverb
Here's a killer dirty patch for the same guitar
Voicing: #5 Warm Vintage
Drive: 80 Master: 67
Low: 4
Mid: 0
Hi: 4
Pres: 8
Compressor: Out Ratio: 1.5/1 Threshold: 100 Gain: 0
EQ
100 = 6
170 = 8
280 = 10
470 = 6
800 = -2
1.3 = 0
2.2 = 0
3.8 = 4
6.3 = 2
WAH: Out / Pedal
Tremolo: Out/Surf
Noise Reduction: In / Gate / 50
Chorus: Out / 50 / 0.3
F/X Loop: In
A = 60%
B = 40%
This patch is being greatly affected by the Quadraverb, YMMV. It's getting a stereo spread treatment via reverbs, plus some chorus and a delay on the whole thing
I like the dirty patch ( boy that just does NOT sound good ) - I noticed you did not put anything down for the TONE CONTROLS -- is that on purpose as you intended for them to be flat and let the graphic eq do the tone control ?
I left mine set to zero - sounds pretty cool all the same !
Regards,
Will.
I guess I forgot the Tone Controls...whooops. I'll be sure to update these posts :)
EDIT: The tone settings have been updated in my original posts
This Dirty patch is a bit over the top w/saturation, and was created for my Ibanez AR200 w/a Seymour Duncan Sh-4 JB in the bridge. The EQ settings are exactly the same as the previous patch - in fact, it's not really all that different from the previous dirty patch I wrote for the Vee.
Voicing: #5 Warm Vintage
Drive: 80 Master: 60
Low: 4
Mid: 0
Hi: 4
Pres: 8
Compressor: Out Ratio: 30/1 Threshold: 100 Gain: 40 (I use the Quad Switch to toggle this on/off)
EQ
100 = 6
170 = 8
280 = 10
470 = 6
800 = -2
1.3 = 0
2.2 = 0
3.8 = 4
6.3 = 2
WAH: Out / Triggered (I use the Quad Switch to toggle this on/off)
Tremolo: Out/Surf
Noise Reduction: In / Gate / 50
Chorus: In / 100 / 0.3 (I use the Quad Switch to toggle this on/off)
F/X Loop: OUT (I use the Quad Switch to toggle this on/off)
This Dirty patch is more of a big overdrive. It's got more of a nasally Classic-rock vibe than the oversaturated 80s stuff. I find it more responsive to picking attack - let me know what you think.
Voicing: #4 Vintage Brown
Drive: 50 Master: 88
Low: 4
Mid: -4
Hi: 0
Pres: 2
Compressor: In Ratio: 1.5/1 Threshold: 100 Gain: 35 (I use the Quad Switch to toggle this on/off)
EQ = FLAT!
WAH: Out / Triggered / Sens=74 / Delay= 0 / Start = 0 (I use the Quad Switch to toggle this on/off)
Tremolo: Out/Surf
Noise Reduction: In / Gate / 35
Chorus: In / 100 / 0.3 (I use the Quad Switch to toggle this on/off)
F/X Loop: OUT (I use the Quad Switch to toggle this on/off)