ADA Depot - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please note "Depot New Registrations Temporarily Suspended" Please see discussions for how to register.

Pages: [1]   Go Down

Author Topic: ADA Flanger Reissue  (Read 9360 times)

0 Members and 1 Guest are viewing this topic.

Rexx

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
ADA Flanger Reissue
« on: Time Format »

I bought this reissue a few years ago so its out of warranty. Last week I was playing and the Enhance knob stopped functioning.
A 10k pot.  This could be a number of things, bad pot, cold solder joint, diode(s) ICs, resistors, caps...  :homer: Oh Boy!
I've been scouring over schematics I can find, seems none are for my reissue.

I guess my first step is to see if I'm getting voltage to the Enhance trim and 10k pot and trace from there.

Anyone have issues with their Ada Flanger?
Logged

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 4702
    • marshalljmpmodshop.net
Re: ADA Flanger Reissue
« Reply #1 on: Time Format »

Do you happen to know if there's a big difference between the old and reissue flangers?I do have the old schematics.
Logged

Rexx

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
Re: ADA Flanger Reissue
« Reply #2 on: Time Format »

I pretty sure the PCB has changed as the BBD is an 8 pin (x2) compared to the old 16 pin SAD 1024.
There's 11 ICs and 4 of them use a socket.
The socket ICs are:
MN3205 (x2) BBD
CD4047
HEF4007.

I have voltage on the T2 trim and Enhance pot, when I find a 10k pot I'm going to try to change that but I think its something else.
Weird that the flanger works as normal except the regeneration "Enhance" function just stopped working?
Logged

GuitarBuilder

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 278
Re: ADA Flanger Reissue
« Reply #3 on: Time Format »

When you say "stopped functioning" do you mean you turn it and it has no effect on the sound?
Logged
ADA and Rockman Heads
Marshall amps
Strats and Les Pauls

GuitarBuilder

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 278
Re: ADA Flanger Reissue
« Reply #4 on: Time Format »

Do you by chance have an oscilloscope?
Logged
ADA and Rockman Heads
Marshall amps
Strats and Les Pauls

Rexx

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
Re: ADA Flanger Reissue
« Reply #5 on: Time Format »


GuitarBuilder, Yes, no effect on sound turning knob & No possession of an  oscilloscope.

My level of electronics repair is fairly low, like soldering a wire that came loose.  I can read a schematic but once I look at the circuit board I'm lost.
Logged

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 4702
    • marshalljmpmodshop.net
Re: ADA Flanger Reissue
« Reply #6 on: Time Format »

There where 2 versions of the flanger,one with the SAD1024 and later a second one with an NM chip in it.I'll check it as soon as i get home from work.
Logged

GuitarBuilder

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 278
Re: ADA Flanger Reissue
« Reply #7 on: Time Format »

AFAIK the Enhance knob simply mixes in some of the output back into the input of the BBD.  One of the quad op amps is buffering the output signal.  It could be something as simple as a broken solder joint.
Logged
ADA and Rockman Heads
Marshall amps
Strats and Les Pauls

Rexx

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
Re: ADA Flanger Reissue
« Reply #8 on: Time Format »

Gonna try extracting the TL074CN Op Amp and replacing it using a 16pin IC socket, seems I've lost all direct signal so it now acts as a vibrato.  :P
Can't live without this effect!  :facepalm:
Logged

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 4702
    • marshalljmpmodshop.net
Re: ADA Flanger Reissue
« Reply #9 on: Time Format »

Mine has a MN3010 BBD in it.Sorry for the late reply.

Strange you lost the direct signal and only have the effect.Now there are 3 quad opamps in it,replacing them should solve the problem.
Logged

Rexx

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
Re: ADA Flanger Reissue
« Reply #10 on: Time Format »

Ok, I'm a little off my game here.  Seems I didn't lose the direct signal but playing around with it yields more weird vibrato sounds at extreme settings.

Changed "Enhance" 10 k pot = Enhance knob still not functioning.

Tried unsoldering IC3 TL074 14 pin chip, nightmare, double sided PCB so solder is on both the top and bottom, burnt off one trace that goes to electrolitic capacitor C35, will make a wired trace once I get the socket in.

How can I unsolder these 14 tiny traces, desoldering braid isn't helping? Should I buy a desoldering bulb?

I've read they stopped making the MN3010, reason why they change the BBD yet again.
Logged

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 4702
    • marshalljmpmodshop.net
Re: ADA Flanger Reissue
« Reply #11 on: Time Format »

http://www.diystompboxes.com/smfforum/index.php?topic=36764.0

Just cut the legs,get the pins out and use desoldering braid to suck out the solder.
Logged

Rexx

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
Re: ADA Flanger Reissue
« Reply #12 on: Time Format »

^Great link thanks^
Logged
Pages: [1]   Go Up