ADA Depot - A Forum To Support Users of ADA Amplification Gear

Let's Get Technical => Troubleshooting Problems => Topic started by: kserri on July 23, 2014, 01:33:04 PM

Title: front panel
Post by: kserri on July 23, 2014, 01:33:04 PM

I´m experiencing problems with the front panel, I cant switch through presets. Display light is ok, it´s disply the preset I´m on, but arrows , numbers, edit and store buttons  do not work. Every time I power the unit it goes one preset up. Ex: on preset 1, switch off , when turn on  , it goes to preset 2. Turn off, when turn on it goes to preset 3 and successively! Someone knows what´s wrong?

Title: Re: front panel
Post by: MarshallJMP on July 24, 2014, 03:00:29 AM

Hey

So none of the buttons work?At start up, does it display all the 8's and all the leds in the buttons go on in sequence?

Title: Re: front panel
Post by: nuttmeg1 on December 01, 2018, 08:39:12 PM

I realize this is an old thread but, I’m having a similar issue. Any wisdom out there to share?

Title: Re: front panel
Post by: rnolan on December 03, 2018, 01:11:27 AM

First easy check is the ribbon cable that goes between the front panel and the main board (careful with it though it's quite delicate)